Welcome to NVDA!
NonVisual Desktop Access (NVDA) is a free and open source screen reader for the Microsoft Windows operating system. Providing feedback via synthetic speech and Braille, it enables blind or vision impaired people to access computers running Windows for no more cost than a sighted person. NVDA is developed by NV Access, with contributions from the community.
NVDA allows blind and vision impaired people to access and interact with the Windows operating system and many third party applications.
Major highlights include:
It is important that people anywhere in the world, no matter what language they speak, get equal access to technology. Besides English, NVDA has been translated into 54 languages including: Afrikaans, Albanian, Amharic, Arabic, Aragonese, Bulgarian, Burmese, Catalan, Chinese (simplified and traditional), Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, Galician, Georgian, German (Germany and Switzerland), Greek, Hebrew, Hindi, Hungarian, Icelandic, Irish, Italian, Japanese, Kannada, Korean, Kyrgyz, Lithuanian, Macedonian, Mongolian, Nepali, Norwegian, Polish, Portuguese (Brazil and Portugal), Punjabi, Romanian, Russian, Serbian, Slovak, Slovenian, Spanish (Colombia and Spain), Swedish, Tamil, Thai, Turkish, Ukrainian and Vietnamese.
Apart from providing its messages and interface in several languages, NVDA can also enable the user to read content in any language, as long as they have a speech synthesizer that can speak that language.
NVDA is bundled with eSpeak NG, a free, open-source, multi-lingual speech synthesizer.
Information about other speech synthesizers that NVDA supports can be found in the Supported Speech Synthesizers section.
For users that own a refreshable braille display, NVDA can output its information in braille. Both uncontracted and contracted braille input via a braille keyboard is also supported. Furthermore, NVDA will detect many braille displays automatically by default. Please see the Supported Braille Displays section for information about the supported braille displays.
NVDA supports braille codes for many languages, including contracted, uncontracted and computer braille codes.
NVDA is copyright 2006-2021 NVDA contributors.
NVDA is available under the GNU General Public License version 2, with two special exceptions. The exceptions are outlined in the license document under the sections "Non-GPL Components in Plugins and Drivers" and "Microsoft Distributable Code". NVDA also includes and uses components which are made available under different free and open source licenses. You are free to share or change this software in any way you like as long as it is accompanied by the license and you make all source code available to anyone who wants it. This applies to both original and modified copies of this software, plus any derivative works.
For further details, you can view the full license. For details regarding exceptions, access the license document from the NVDA menu under the "help" section.
If you have not yet got a copy of NVDA, you can download it from the NV Access website.
Go to the download section and you will find a link to download the latest version of NVDA.
Running the file you have just downloaded will start a temporary copy of NVDA. You will then be asked if you want to install NVDA, create a portable copy or just continue using the temporary copy.
If you plan to always use NVDA on this computer, you will want to choose to install NVDA. Installing NVDA will allow for additional functionality such as automatic starting after sign-in, the ability to read the Windows sign-in and security screens (which cannot be done with portable and temporary copies) and creation of Start Menu and desktop shortcuts. The installed copy is also able to create a portable copy itself at any time.
If you want to take NVDA with you on a USB thumb drive or other writable media, then you should choose to create a portable copy. The portable copy also has the ability to install itself on any computer at a later time. However, if you wish to copy NVDA onto read-only media such as a CD, you should just copy the download package. Running the portable version directly from read-only media is not supported at this time.
Using the temporary copy of NVDA is also an option (e.g. for demonstration purposes), though starting NVDA in this way each time can become very time consuming.
Apart from the inability to automatically start during and/or after log-on, the portable and temporary copies of NVDA also have the following restrictions:
If installing NVDA directly from the NVDA download package, press the Install NVDA button. If you have already closed this dialog or are wanting to install from a portable copy, please choose the Install NVDA menu item found under Tools in the NVDA menu.
The installation dialog that appears will confirm whether you wish to install NVDA and will also tell you whether this installation will be updating a previous install. Pressing the Continue button will start installing NVDA. There are also a few options in this dialog which are explained below. Once the installation has completed, a message will appear telling you that it was successful. Pressing OK at this point will restart the newly installed copy of NVDA.
If you have add-ons already installed there may also be a warning that incompatible add-ons will be disabled. Before you're able to press the Continue button you will have to use the checkbox to confirm that you understand that these add-ons will be disabled. There will also be a button present to review the add-ons that will be disabled. Refer to the incompatible add-ons dialog section for more help on this button.
This option allows you to choose whether or not NVDA should automatically start while at the Windows sign-in screen, before you have entered a password. This also includes User Account Control and other secure screens. This option is enabled by default for fresh installations.
This option allows you to choose whether or not NVDA should create a shortcut on the desktop to start NVDA. If created, this shortcut will also be assigned a shortcut key of control+alt+n, allowing you to start NVDA at any time with this keystroke.
This option allows you to choose whether or not NVDA should copy the user configuration from the currently running NVDA into the configuration for the currently logged on user, for the installed copy of NVDA. This will not copy the configuration for any other users of this system nor to the system configuration for use during Windows sign-in and other secure screens. This option is only available when installing from a portable copy, not when installing directly from the downloaded Launcher package.
If creating a portable copy directly from the NVDA download package, simply press the Create Portable Copy button. If you have already closed this dialog or you are running an installed copy of NVDA, choose the Create Portable copy menu item found under Tools in the NVDA menu.
The Dialog that appears allows you to choose where the portable copy should be created. This can be a directory on your hard drive or a location on a USB thumb drive or other portable media. There is also an option to choose whether NVDA should copy the logged on user's current NVDA configuration for use with the newly created portable copy. This option is only available when creating a portable copy from an installed copy, not when creating from the download package. Pressing Continue will create the portable copy. Once creation is complete, a message will appear telling you it was successful. Press OK to dismiss this dialog.
If you have installed NVDA with the installer, then starting NVDA is as simple as either pressing control+alt+n, or choosing NVDA from the NVDA menu under Programs on the Start Menu. Additionally you can type NVDA into the Run dialog and press Enter. If NVDA is already running, it will be restarted. You can also pass some command line options which allows you to quit (-q), disable add-ons (--disable-addons), etc.
For installed copies, NVDA stores the configuration in the roaming application data folder of the current user by default (e.g. "C:\Users\<user>\AppData\Roaming"). It is possible to change this in a way that NVDA loads its configuration from the local application data folder instead. Consult the section about system wide parameters for more details.
To start the portable version, go to the directory you unpacked NVDA to, and press enter or double click on nvda.exe. If NVDA was already running, it will automatically stop before starting the portable version.
As NVDA starts, you will first hear an ascending set of tones (telling you that NVDA is loading). Depending on how fast your computer is, or if you are running NVDA off a USB key or other slow media, it may take a little while to start. If it is taking an extra-long time to start, NVDA should say "Loading NVDA. Please wait..."
If you don't hear any of this, or you hear the Windows error sound, or a descending set of tones, then this means that NVDA has an error, and you will need to possibly report a bug to the developers. Please check out the NVDA website for how to do this.
When NVDA starts for the first time, you will be greeted by a dialog box which provides you with some basic information about the NVDA modifier key and the NVDA menu. (Please see further sections about these topics.) The dialog box also contains a combo box and three checkboxes. The combo box lets you select the keyboard layout. The first checkbox lets you control if NVDA should use the Caps Lock as an NVDA modifier key. The second specifies whether NVDA should start automatically after you log on to Windows and is only available for installed copies of NVDA. The third lets you control if this Welcome dialog should appear each time NVDA starts.
Starting from NVDA 2018.3, the user is asked if they want to allow usage data to be sent to NV Access in order to help improve NVDA in the future. When starting NVDA for the first time, a dialog will appear which will ask you if you want to accept sending data to NV Access while using NVDA. You can read more info about the data gathered by NV Access in the general settings section, Allow the NVDA project to gather NVDA usage statistics. Note: pressing on "yes" or "no" will save this setting and the dialog will never appear again unless you reinstall NVDA. However, you can enable or disable the data gathering process manually in NVDA's general settings panel. For changing this setting manually, you can check or uncheck the checkbox called Allow the NVDA project to gather NVDA usage statistics.
Most NVDA-specific keyboard commands consist of pressing a particular key called the NVDA modifier key in conjunction with one or more other keys. Notable exceptions to this are the text review commands for the desktop keyboard layout which just use the numpad keys by themselves, but there are some other exceptions as well.
NVDA can be configured so that the numpad Insert, Extended Insert and/or Caps Lock key can be used as the NVDA modifier key. By default, both the numpad Insert and Extended Insert keys are set as NVDA modifier keys.
If you wish to cause one of the NVDA modifier keys to behave as it usually would if NVDA were not running (e.g. you wish to turn Caps Lock on when you have set Caps Lock to be an NVDA modifier key), you can press the key twice in quick succession.
NVDA currently comes with two sets of key commands (known as keyboard layouts): the desktop layout and the laptop layout. By default, NVDA is set to use the Desktop layout, though you can switch to the Laptop layout in the Keyboard category of the NVDA Settings dialog, found under Preferences in the NVDA menu.
The Desktop layout makes heavy use of the numpad (with Num Lock off). Although most laptops do not have a physical numpad, some laptops can emulate one by holding down the FN key and pressing letters and numbers on the right-hand side of the keyboard (7, 8, 9, u, i, o, j, k, l, etc.). If your laptop cannot do this or does not allow you to turn Num Lock off, you may want to switch to the Laptop layout instead.
If you are running NVDA on a device with a touchscreen and running Windows 8 or higher, you can also control NVDA directly via touch commands. While NVDA is running, unless touch interaction support is disabled, all touch input will go directly to NVDA. Therefore, actions that can be performed normally without NVDA will not work. To toggle touch interaction support, press NVDA+control+alt+t. You can also enable or disable touch interaction support from the Touch Interaction category of the NVDA settings.
The most basic action you can perform with the touch screen is to announce the control or text at any point on the screen. To do this, place one finger anywhere on the screen. You can also keep your finger on the screen and move it around to read other controls and text that your finger moves over.
When NVDA commands are described later in this user guide, they may list a touch gesture which can be used to activate that command with the touchscreen. Following are some instructions on how to perform the various touch gestures.
Tap the screen quickly with one or more fingers.
Tapping once with one finger is simply known as a tap. Tapping with 2 fingers at the same time is a 2-finger tap and so on.
If the same tap is performed one or more times again in quick succession, NVDA will instead treat this as a multi-tap gesture. Tapping twice will result in a double-tap. Tapping 3 times will result in a triple-tap and so on. Of course, these multi-tap gestures also recognize how many fingers were used, so it's possible to have gestures like a 2-finger triple-tap, a 4-finger tap, etc.
Quickly swipe your finger across the screen.
There are 4 possible flick gestures depending on the direction: flick left, flick right, flick up and flick down.
Just like taps, more than one finger can be used to perform the gesture. Therefore, gestures such as 2-finger flick up and 4-finger flick left are all possible.
As there are many more NVDA commands than possible touch gestures, NVDA has several touch modes you can switch between which make certain subsets of commands available. The two modes are text mode and object mode. Certain NVDA commands listed in this document may have a touch mode listed in brackets after the touch gesture. For example, flick up (text mode) means that the command will be performed if you flick up, but only while in text mode. If the command does not have a mode listed, it will work in any mode.
To toggle touch modes, perform a 3-finger tap.
The touch keyboard is used to enter text and commands from a touchscreen. When focused on an edit field, you can bring up the touch keyboard by double-tapping the touch keyboard icon on the bottom of the screen. For tablets such as Microsoft Surface Pro, the touch keyboard is always available when the keyboard is undocked. To dismiss the touch keyboard, double-tap the touch keyboard icon or move away from the edit field.
While the touch keyboard is active, to locate keys on the touch keyboard, move your finger to where the touch keyboard is located (typically at the bottom of the screen), then move around the keyboard with one finger. When you find the key you wish to press, double-tap the key or lift your finger, depending on options chosen from the Touch Interaction Settings category of the NVDA Settings.
Many NVDA commands are mentioned throughout the rest of this user guide, but an easy way to explore all the different commands is to turn on input help.
To turn on input help, press NVDA+1. To turn it off, press NVDA+1 again. While in input help, performing any input gesture (such as pressing a key or performing a touch gesture) will report the action and describe what it does (if anything). The actual commands will not execute while in input help mode.
The NVDA menu allows you to control NVDA's settings, access help, save/revert your configuration, Modify speech dictionaries, access additional tools and exit NVDA.
To get to the NVDA menu from anywhere in Windows while NVDA is running, press NVDA+n on the keyboard or perform a 2-finger double-tap on the touch screen. You can also get to the NVDA menu via the Windows system tray. Either right-click on the NVDA icon located in the system tray, or access the system tray by pressing the Windows logo key+B, DownArrow to the NVDA icon and press the applications key located next to the right control key on most keyboards. When the menu comes up, You can use the arrow keys to navigate the menu, and the enter key to activate an item.
| Name | Desktop key | Laptop key | Touch | Description |
|---|---|---|---|---|
| Starts or restarts NVDA | Control+alt+n | Control+alt+n | none | Starts or restarts NVDA from the Desktop, if this Windows shortcut is enabled during NVDA's installation process. This is a Windows specific shortcut and therefore it cannot be reassigned in the input gestures dialog. |
| Stop speech | Control | control | 2-finger tap | Instantly stops speaking |
| Pause Speech | shift | shift | none | Instantly pauses speech. Pressing it again will continue speaking where it left off (if pausing is supported by the current synthesizer) |
| NVDA Menu | NVDA+n | NVDA+n | 2-finger double-tap | Pops up the NVDA menu to allow you to access preferences, tools, help, etc. |
| Toggle Speech Mode | NVDA+s | NVDA+s | none | Toggles speech mode between speech, beeps and off. |
| Toggle Input Help Mode | NVDA+1 | NVDA+1 | none | Pressing any key in this mode will report the key, and the description of any NVDA command associated with it |
| Quit NVDA | NVDA+q | NVDA+q | none | Exits NVDA |
| Pass next key through | NVDA+f2 | NVDA+f2 | none | Tells NVDA to pass the next key press straight through to the active application - even if it is normally treated as an NVDA key command |
| Toggle application sleep mode on and off | NVDA+shift+s | NVDA+shift+z | none | sleep mode disables all NVDA commands and speech/braille output for the current application. This is most useful in applications that provide their own speech or screen reading features. Press this command again to disable sleep mode - note that NVDA will only retain the Sleep Mode setting until it is restarted. |
| Name | key | Description |
|---|---|---|
| Report date/time | NVDA+f12 | Pressing once reports the current time, pressing twice reports the date |
| Report battery status | NVDA+shift+b | Reports the battery status i.e. whether AC power is in use or the current charge percentage. |
| Report clipboard text | NVDA+c | Reports the Text on the clipboard if there is any. |
NVDA allows you to explore and navigate the system in several ways, including both normal interaction and review.
Each Application and the operating system itself consist of many objects. An object is a single item such as a piece of text, button, checkbox, slider, list or editable text field.
The system focus, also known simply as the focus, is the object which receives keys typed on the keyboard. For example, if you are typing into an editable text field, the editable text field has the focus.
The most common way of navigating around Windows with NVDA is to simply move the system focus using standard Windows keyboard commands, such as pressing tab and shift+tab to move forward and back between controls, pressing alt to get to the menu bar and then using the arrows to navigate menus, and using alt+tab to move between running applications. As you do this, NVDA will report information about the object with focus, such as its name, type, value, state, description, keyboard shortcut and positional information. When Focus Highlight is enabled, the location of the current system focus is also exposed visually.
There are some key commands that are useful when moving with the System focus:
| Name | Desktop key | Laptop key | Description |
|---|---|---|---|
| Report current focus | NVDA+tab | NVDA+tab | announces the current object or control that has the System focus. Pressing twice will spell the information |
| Report title | NVDA+t | NVDA+t | Reports the title of the currently active window. Pressing twice will spell the information. Pressing three times will copy it to the clipboard |
| Read active window | NVDA+b | NVDA+b | reads all the controls in the currently active window (useful for dialogs) |
| Report Status Bar | NVDA+end | NVDA+shift+end | Reports the Status Bar if NVDA finds one. It also moves the navigator object to this location. Pressing twice will spell the information. Pressing three times will copy it to the clipboard |
When an object that allows navigation and/or editing of text is focused, you can move through the text using the system caret, also known as the edit cursor.
When the focus is on an object that has the system caret, you can use the arrow keys, page up, page down, home, end, etc. to move through the text. You can also change the text if the control supports editing. NVDA will announce as you move by character, word and line, and will also announce as you select and unselect text.
NVDA provides the following key commands in relation to the system caret:
| Name | Desktop key | Laptop key | Description |
|---|---|---|---|
| Say all | NVDA+downArrow | NVDA+a | Starts reading from the current position of the system caret, moving it along as it goes |
| Read current line | NVDA+upArrow | NVDA+l | Reads the line where the system caret is currently situated. Pressing twice spells the line. Pressing three times spells the line using character descriptions. |
| Read current text selection | NVDA+Shift+upArrow | NVDA+shift+s | Reads any currently selected text |
| Report text formatting | NVDA+f | NVDA+f | Reports the formatting of the text where the caret is currently situated. Pressing twice shows the information in browse mode |
| Next sentence | alt+downArrow | alt+downArrow | Moves the caret to the next sentence and announces it. (only supported in Microsoft Word and Outlook) |
| Previous sentence | alt+upArrow | alt+upArrow | Moves the caret to the previous sentence and announces it. (only supported in Microsoft Word and Outlook) |
When within a table, the following key commands are also available:
| Name | Key | Description |
|---|---|---|
| Move to previous column | control+alt+leftArrow | Moves the system caret to the previous column (staying in the same row) |
| Move to next column | control+alt+rightArrow | Moves the system caret to the next column (staying in the same row) |
| Move to previous row | control+alt+upArrow | Moves the system caret to the previous row (staying in the same column) |
| Move to next row | control+alt+downArrow | Moves the system caret to the next row (staying in the same column) |
Most of the time, you will work with applications using commands which move the focus and the caret. However, sometimes, you may wish to explore the current application or the Operating System without moving the focus or caret. You may also wish to work with objects that cannot be accessed normally using the keyboard. In these cases, you can use object navigation.
Object navigation allows you to move between and obtain information about individual objects. When you move to an object, NVDA will report it similarly to the way it reports the system focus. For a way to review all text as it appears on the screen, you can instead use screen review.
Rather than having to move back and forth between every single object on the system, the objects are organized hierarchically. This means that some objects contain other objects and you must move inside them to access the objects they contain. For example, a list contains list items, so you must move inside the list in order to access its items. If you have moved to a list item, moving next and previous will take you to other list items in the same list. Moving to a list item's containing object will take you back to the list. You can then move past the list if you wish to access other objects. Similarly, a toolbar contains controls, so you must move inside the toolbar to access the controls in the toolbar.
The object currently being reviewed is called the navigator object. Once you navigate to an object, you can review its content using the text review commands while in Object review mode. When Focus Highlight is enabled, the location of the current navigator object is also exposed visually. By default, the navigator object moves along with the System focus, though this behaviour can be toggled on and off.
Note: Braille following Object Navigation can be configured via Braille Tether.
To navigate by object, use the following commands:
| Name | Desktop key | Laptop key | Touch | Description |
|---|---|---|---|---|
| Report current object | NVDA+numpad5 | NVDA+shift+o | none | Reports the current navigator object. Pressing twice spells the information, and pressing 3 times copies this object's name and value to the clipboard. |
| Move to containing object | NVDA+numpad8 | NVDA+shift+upArrow | flick up (object mode) | Moves to the object containing the current navigator object |
| Move to previous object | NVDA+numpad4 | NVDA+shift+leftArrow | flick left (object mode) | Moves to the object before the current navigator object |
| Move to next object | NVDA+numpad6 | NVDA+shift+rightArrow | flick right (object mode) | Moves to the object after the current navigator object |
| Move to first contained object | NVDA+numpad2 | NVDA+shift+downArrow | flick down (object mode) | Moves to the first object contained by the current navigator object |
| Move to focus object | NVDA+numpadMinus | NVDA+backspace | none | Moves to the object that currently has the system focus, and also places the review cursor at the position of the System caret, if it is showing |
| Activate current navigator object | NVDA+numpadEnter | NVDA+enter | double-tap | Activates the current navigator object (similar to clicking with the mouse or pressing space when it has the system focus) |
| Move System focus or caret to current review position | NVDA+shift+numpadMinus | NVDA+shift+backspace | none | pressed once Moves the System focus to the current navigator object, pressed twice moves the system caret to the position of the review cursor |
| Report review cursor location | NVDA+numpadDelete | NVDA+delete | none | Reports information about the location of the text or object at the review cursor. For example, this might include the percentage through the document, the distance from the edge of the page or the exact screen position. Pressing twice may provide further detail. |
Note: numpad keys require the Num Lock to be turned off to work properly.
NVDA allows you to read the contents of the screen, current document or current object by character, word or line. This is mostly useful in places (including Windows command consoles) where there is no system caret. For example, you might use it to review the text of a long information message in a dialog.
When moving the review cursor, the System caret does not follow along, so you can review text without losing your editing position. However, by default, when the System caret moves, the review cursor follows along. This can be toggled on and off.
Note: Braille following the review cursor can be configured via Braille Tether.
The following commands are available for reviewing text:
| Name | Desktop key | Laptop key | Touch | Description |
|---|---|---|---|---|
| Move to top line in review | shift+numpad7 | NVDA+control+home | none | Moves the review cursor to the top line of the text |
| Move to previous line in review | numpad7 | NVDA+upArrow | flick up (text mode) | Moves the review cursor to the previous line of text |
| Report current line in review | numpad8 | NVDA+shift+. | none | Announces the current line of text where the review cursor is positioned. Pressing twice spells the line. Pressing three times spells the line using character descriptions. |
| Move to next line in review | numpad9 | NVDA+downArrow | flick down (text mode) | Move the review cursor to the next line of text |
| Move to bottom line in review | shift+numpad9 | NVDA+control+end | none | Moves the review cursor to the bottom line of text |
| Move to previous word in review | numpad4 | NVDA+control+leftArrow | 2-finger flick left (text mode) | Moves the review cursor to the previous word in the text |
| Report current word in review | numpad5 | NVDA+control+. | none | Announces the current word in the text where the review cursor is positioned. Pressing twice spells the word. Pressing three times spells the word using character descriptions. |
| Move to next word in review | numpad6 | NVDA+control+rightArrow | 2-finger flick right (text mode) | Move the review cursor to the next word in the text |
| Move to start of line in review | shift+numpad1 | NVDA+home | none | Moves the review cursor to the start of the current line in the text |
| Move to previous character in review | numpad1 | NVDA+leftArrow | flick left (text mode) | Moves the review cursor to the previous character on the current line in the text |
| Report current character in review | numpad2 | NVDA+. | none | Announces the current character on the line of text where the review cursor is positioned. Pressing twice reports a description or example of that character. Pressing three times reports the numeric value of the character in decimal and hexadecimal. |
| Move to next character in review | numpad3 | NVDA+rightArrow | flick right (text mode) | Move the review cursor to the next character on the current line of text |
| Move to end of line in review | shift+numpad3 | NVDA+end | none | Moves the review cursor to the end of the current line of text |
| Say all with review | numpadPlus | NVDA+shift+a | 3-finger flick down (text mode) | Reads from the current position of the review cursor, moving it as it goes |
| Select then Copy from review cursor | NVDA+f9 | NVDA+f9 | none | Starts the select then copy process from the current position of the review cursor. The actual action is not performed until you tell NVDA where the end of the text range is |
| Select then Copy to review cursor | NVDA+f10 | NVDA+f10 | none | On the first press, text is selected from the position previously set as start marker up to and including the review cursor's current position. If the system caret can reach the text, it will be moved to the selected text. After pressing this key stroke a second time, the text will be copied to the Windows clipboard |
| Move to marked start for copy in review | NVDA+shift+f9 | NVDA+shift+f9 | none | Moves the review cursor to the position previously set start marker for copy |
| Report text formatting | NVDA+shift+f | NVDA+shift+f | none | Reports the formatting of the text where the review cursor is currently situated. Pressing twice shows the information in browse mode |
| Report current symbol replacement | None | None | none | Speaks the symbol where the review cursor is positioned. Pressed twice, shows the symbol and the text used to speak it in browse mode. |
Note: numpad keys require the Num Lock to be turned off to work properly.
A good way to remember the basic text review commands when using the Desktop layout is to think of them as being in a grid of three by three, with top to bottom being line, word and character and left to right being previous, current and next. The layout is illustrated as follows:
| Previous line | Current line | Next line |
| Previous word | Current word | Next word |
| Previous character | Current character | Next character |
NVDA's text review commands can review content within the current navigator object, current document or screen, depending on the review mode selected. Review modes are a replacement for the older Flat Review concept found in NVDA.
The following commands switch between review modes:
| Name | Desktop key | Laptop key | Touch | Description |
|---|---|---|---|---|
| Switch to next review mode | NVDA+numpad7 | NVDA+pageUp | 2-finger flick up | switches to the next available review mode |
| Switch to previous review mode | NVDA+numpad1 | NVDA+pageDown | 2-finger flick down | switches to the previous available review mode |
While in object review mode, you are able to only review the content of the current navigator object. For objects such as editable text fields or other basic text controls, this will generally be the text content. For other objects, this may be the name and/or value.
When the navigator object is within a browse mode document (e.g. web page) or other complex document (e.g. a Lotus Symphony document), it is possible to switch to the document review mode. The document review mode allows you to review the text of the entire document.
When switching from object review to document review, the review cursor is placed in the document at the position of the navigator object. When moving around the document with review commands, the navigator object is automatically updated to the object found at the current review cursor position.
Note that NVDA will switch to document review from object review automatically when moving around browse mode documents.
The screen review mode allows you to review the text of the screen as it appears visually within the current application. This is similar to the screen review or mouse cursor functionality in many other Windows screen readers.
When switching to screen review mode, the review cursor is placed at the screen position of the current navigator object. When moving around the screen with review commands, the navigator object is automatically updated to the object found at the screen position of the review cursor.
Note that in some newer applications, NVDA may not see some or all text displayed on the screen due to the use of newer screen drawing technologies which are impossible to support at this time.
When you move the mouse, NVDA by default reports the text that is directly under the mouse pointer as the pointer moves over it. Where supported, NVDA will read the surrounding paragraph of text, though some controls may only read by line.
NVDA can be configured to also announce the type of object under the mouse as it moves (e.g. list, button, etc.). This may be useful for totally blind users, as sometimes, the text isn't enough.
NVDA provides a way for users to understand where the mouse is located relative to the dimensions of the screen by playing the current mouse coordinates as audio beeps. The higher the mouse is on the screen, the higher the pitch of the beeps. The further left or right the mouse is located on the screen, the further left or right the sound will be played (assuming the user has stereo speakers or headphones).
These extra mouse features are not turned on by default in NVDA. If you wish to take advantage of them, you can configure them from the Mouse settings category of the NVDA Settings dialog, found in the NVDA Preferences menu.
Although a physical mouse or trackpad should be used to navigate with the mouse, NVDA provides some commands related to the mouse:
| Name | Desktop key | Laptop key | Touch | Description |
|---|---|---|---|---|
| Left mouse button click | numpadDivide | NVDA+[ | none | Clicks the left mouse button once. The common double click can be performed by pressing this key twice in quick succession |
| Left mouse button lock | shift+numpadDivide | NVDA+control+[ | none | Locks the left mouse button down. Press again to release it. To drag the mouse, press this key to lock the left button down and then move the mouse either physically or use one of the other mouse routing commands |
| Right mouse click | numpadMultiply | NVDA+] | tap and hold | Clicks the right mouse button once, mostly used to open context menu at the location of the mouse. |
| Right mouse button lock | shift+numpadMultiply | NVDA+control+] | none | Locks the right mouse button down. Press again to release it. To drag the mouse, press this key to lock the right button down and then move the mouse either physically or use one of the other mouse routing commands |
| Move mouse to current navigator object | NVDA+numpadDivide | NVDA+shift+m | none | Moves the mouse to the location of the current navigator object and review cursor |
| Navigate to the object under the mouse | NVDA+numpadMultiply | NVDA+shift+n | none | Set the navigator object to the object located at the position of the mouse |
Complex read-only documents such as web pages are browsed in NVDA using browse mode. This includes documents in the following applications:
Browse mode is also optionally available for Microsoft Word documents.
In browse mode, the content of the document is made available in a flat representation that can be navigated with the cursor keys as if it were a normal text document. All of NVDA's system caret key commands will work in this mode; e.g. say all, report formatting, table navigation commands, etc. When Focus Highlight is enabled, the location of the virtual browse mode caret is also exposed visually. Information such as whether text is a link, heading, etc. is reported along with the text as you move.
Sometimes, you will need to interact directly with controls in these documents. For example, you will need to do this for editable text fields and lists so that you can type characters and use the cursor keys to work with the control. You do this by switching to focus mode, where almost all keys are passed to the control. When in Browse mode, by default, NVDA will automatically switch to focus mode if you tab to or click on a particular control that requires it. Conversely, tabbing to or clicking on a control that does not require focus mode will switch back to browse mode. You can also press enter or space to switch to focus mode on controls that require it. Pressing escape will switch back to browse mode. In addition, you can manually force focus mode, after which it will remain in effect until you choose to disable it.
| Name | Key | Description |
|---|---|---|
| Toggle browse/focus modes | NVDA+space | Toggles between focus mode and browse mode |
| Exit focus mode | escape | Switches back to browse mode if focus mode was previously switched to automatically |
| Refresh browse mode document | NVDA+f5 | Reloads the current document content (useful if certain content seems to be missing from the document. Not available in Microsoft Word and Outlook.) |
| Find | NVDA+control+f | Pops up a dialog in which you can type some text to find in the current document. See searching for text for more information. |
| Find next | NVDA+f3 | Finds the next occurrence of the text in the document that you previously searched for |
| Find previous | NVDA+shift+f3 | Finds the previous occurrence of the text in the document you previously searched for |
| Open long description | NVDA+d | Opens a new window containing a long description for the element you are on if it has one. |
While in browse mode, for quicker navigation, NVDA also provides single character keys to jump to certain fields in the document. Note that not all of these commands are supported in every type of document.
The following keys by themselves jump to the next available element, while adding the shift key causes them to jump to the previous element:
To move to the beginning or end of containing elements such as lists and tables:
| Name | Key | Description |
|---|---|---|
| Move to start of container | shift+comma | Moves to the start of the container (list, table, etc.) where the caret is positioned |
| Move past end of container | comma | Moves past the end of the container (list, table, etc.) where the caret is positioned |
Some web applications such as Gmail, Twitter and Facebook use single letters as shortcut keys. If you want to use these while still being able to use your cursor keys to read in browse mode, you can temporarily disable NVDA's single letter navigation keys. To toggle single letter navigation on and off for the current document, press NVDA+shift+space.
The elements list provides access to a list of various types of elements in the document as appropriate for the application. For example, in web browsers, the elements list can list links, headings, form fields, buttons or landmarks. Radio buttons allow you to switch between the different types of elements. An edit field is also provided in the dialog which allows you to filter the list to help you search for a particular item on the page. Once you have chosen an item, you can use the provided buttons in the dialog to move to or activate that item.
| Name | Key | Description |
|---|---|---|
| Browse mode elements list | NVDA+f7 | Lists various types of elements in the current document |
This dialog allows you to search for terms in the current document. In the "Type the text you wish to find" field, the text to be found can be entered. The "Case sensitive" checkbox makes the search consider uppercase and lowercase letters differently. For example, with "Case sensitive" selected you can find "NV Access" but not "nv access". Use the following keys for performing searches:
| Name | Key | Description |
|---|---|---|
| Find text | NVDA+control+f | Opens the search dialog |
| Find next | NVDA+f3 | searches the next occurrence of the current search term |
| Find previous | NVDA+shift+f3 | searches the previous occurrence of the current search term |
Pages can include rich content using technologies such as Adobe Flash, Oracle Java and HTML5, as well as applications and dialogs. Where these are encountered in browse mode, NVDA will report "embedded object", "application" or "dialog", respectively. You can quickly move to them using the o and shift+o embedded object single letter navigation keys. To interact with these objects, you can press enter on them. If it is accessible, you can then tab around it and interact with it like any other application. A key command is provided to return to the original page containing the embedded object:
| Name | Key | Description |
|---|---|---|
| Move to containing browse mode document | NVDA+control+space | Moves the focus out of the current embedded object and into the document that contains it |
Using MathPlayer 4 from Design Science, NVDA can read and interactively navigate supported mathematical content. This requires that MathPlayer 4 is installed on the computer. MathPlayer is available as a free download from: https://www.dessci.com/en/products/mathplayer/
NVDA supports the following types of mathematical content:
When reading a document, NVDA will speak any supported mathematical content where it occurs. If you are using a braille display, it will also be displayed in braille.
If you are working primarily with speech, in most cases, you will probably wish to examine the expression in smaller segments, rather than hearing the entire expression at once.
If you are in browse mode, you can do this by moving the cursor to the mathematical content and pressing enter.
If you are not in browse mode:
| Name | Key | Description |
|---|---|---|
| Interact with math content | NVDA+alt+m | Begins interaction with math content. |
At this point, you can use MathPlayer commands such as the arrow keys to explore the expression. For example, you can move through the expression with the left and right arrow keys and zoom into a portion of the expression such as a fraction using the down arrow key. Please see the MathPlayer documentation about navigation commands for further information.
When you wish to return to the document, simply press the escape key.
Sometimes mathematical content might be displayed as a button or other type of element which, when activated, can display a dialog or more information related to the formula. To activate the button or the element containing the formula, press ctrl+enter.
If you own a braille display, NVDA can display information in braille. If your braille display has a Perkins-style keyboard, you can also enter contracted or uncontracted braille. Braille can also be displayed on screen using the Braille Viewer instead of, or at the same time as, using a physical braille display.
Please see the Supported Braille Displays section for information about the supported braille displays. This section also contains information about what displays support NVDA's automatic background braille display detection functionality. You can configure braille using the Braille category of the NVDA Settings dialog.
In order to fit as much information as possible on a braille display, the following abbreviations have been defined to indicate control type and state as well as landmarks.
| Abbreviation | Control type |
|---|---|
| app | application |
| art | article |
| bqt | block quote |
| btn | button |
| drbtn | drop down button |
| spnbtn | spin button |
| splbtn | split button |
| tgbtn | toggle button |
| cap | caption |
| cbo | combo box |
| chk | checkbox |
| dlg | dialog |
| doc | document |
| edt | editable text field |
| pwdedt | password edit |
| embedded | embedded object |
| enote | end note |
| fig | figure |
| fnote | foot note |
| gra | graphic |
| grp | grouping |
| hN | heading at level n, e.g. h1, h2. |
| hlp | help balloon |
| lmk | landmark |
| lnk | link |
| vlnk | visited link |
| lst | list |
| mnu | menu |
| mnubar | menu bar |
| mnubtn | menu button |
| mnuitem | menu item |
| pnl | panel |
| prgbar | progress bar |
| rbtn | radio button |
| scrlbar | scroll bar |
| sect | section |
| stbar | status bar |
| tabctl | tab control |
| tbl | table |
| cN | table column number n, e.g. c1, c2. |
| rN | table row number n, e.g. r1, r2. |
| term | terminal |
| tlbar | tool bar |
| tltip | tool tip |
| tv | tree view |
| tvbtn | tree view button |
| tvitem | tree view item |
| lv N | a tree view item has a hierarchical level N| |
| wnd | window |
| ⠤⠤⠤⠤⠤ | separator |
| mrkd | marked content |
The following state indicators are also defined:
| Abbreviation | Control state |
|---|---|
| ... | displayed when an object supports autocompletion |
| ⢎⣿⡱ | displayed when an object (e.g. a toggle button) is pressed |
| ⢎⣀⡱ | displayed when an object (e.g. a toggle button) is not pressed |
| ⣏⣿⣹ | displayed when an object (e.g. a checkbox) is checked |
| ⣏⣸⣹ | displayed when an object (e.g. a checkbox) is half checked |
| ⣏⣀⣹ | displayed when an object (e.g. a checkbox) is not checked |
| - | displayed when an object (e.g. a tree view item) is collapsible |
| + | displayed when an object (e.g. a tree view item) is Expandable |
| *** | displayed when a protected control or document is encountered |
| clk | displayed when an object is clickable |
| cmnt | displayed when there is a comment for a spreadsheet cell or piece of text in a document |
| frml | displayed when there is a formula on a spreadsheet cell |
| invalid | displayed when an invalid entry has been made |
| ldesc | displayed when an object (usually a graphic) has a long description |
| mln | displayed when an edit field allows typing multiple lines of text such as comment fields on websites |
| req | displayed when a required form field is encountered |
| ro | displayed when an object (e.g. an editable text field) is read-only |
| sel | displayed when an object is selected |
| nsel | displayed when an object is not selected |
| sorted asc | displayed when an object is sorted ascending |
| sorted desc | displayed when an object is sorted descending |
| submnu | displayed when an object has a popup (usually a sub-menu) |
Finally, the following abbreviations for landmarks are defined:
| Abbreviation | Landmark |
|---|---|
| bnnr | banner |
| cinf | content info |
| cmpl | complementary |
| form | form |
| main | main |
| navi | navigation |
| srch | search |
| rgn | region |
NVDA supports entry of both uncontracted and contracted braille via a braille keyboard. You can select the translation table used to translate braille into text using the Input table setting in the Braille category of the NVDA Settings dialog.
When uncontracted braille is being used, text is inserted as soon as it is entered. When using contracted braille, text is inserted when you press space or enter at the end of a word. Note that translation can only reflect the braille word you are typing and cannot consider existing text. For example, if you are using a braille code that begins numbers with a number sign and you press backspace to move to the end of a number, you will need to type the number sign again to enter additional numbers.
Pressing dot 7 erases the last entered braille cell or character. Dot 8 translates any braille input and presses the enter key. Pressing dot 7 + dot 8 translates any braille input, but without adding a space or pressing enter.
While NVDA is primarily aimed at blind or vision impaired people who primarily use speech and/or braille to operate a computer, it also provides built-in facilities to change the contents of the screen. Within NVDA, such a visual aid is called a vision enhancement provider.
NVDA offers several built-in vision enhancement providers which are described below. Additional vision enhancement providers can be provided in NVDA add-ons.
NVDA's vision settings can be changed in the vision category of the NVDA Settings dialog.
Focus Highlight can help to identify the system focus, navigator object and browse mode positions. These positions are highlighted with a coloured rectangle outline.
When Focus Highlight is enabled in the vision category of the NVDA Settings dialog, you can change whether or not to highlight the focus, navigator object or browse mode caret.
As a blind or vision impaired user, it is often not possible or necessary to see the contents of the screen. Furthermore, it might be hard to ensure that there isn't someone looking over your shoulder. For this situation, NVDA contains a feature called "screen curtain" which can be enabled to make the screen black.
You can enable the Screen Curtain in the vision category of the NVDA Settings dialog.
When authors don't provide sufficient information for a screen reader user to determine the content of something, various tools can be used to attempt to recognize the content from an image. NVDA supports the optical character recognition (OCR) functionality built into Windows 10 to recognize text from images. Additional content recognizers can be provided in NVDA add-ons.
When you use a content recognition command, NVDA recognizes content from the current navigator object. By default, the navigator object follows the system focus or browse mode cursor, so you can usually just move the focus or browse mode cursor where desired. For example, if you move the browse mode cursor to a graphic, recognition will recognize content from the graphic by default. However, you may wish to use object navigation directly to, for example, recognize the content of an entire application window.
Once recognition is complete, the result will be presented in a document similar to browse mode, allowing you to read the information with cursor keys, etc. Pressing enter or space will activate (normally click) the text at the cursor if possible. Pressing escape dismisses the recognition result.
Windows 10 includes OCR for many languages. NVDA can use this to recognize text from images or inaccessible applications.
You can set the language to use for text recognition in the Windows 10 OCR category of the NVDA Settings dialog. Additional languages can be installed by opening the Start menu, choosing Settings, selecting Time & Language -> Region & Language and then choosing Add a language.
To recognize the text in the current navigator object using Windows 10 OCR, press NVDA+r.
NVDA provides its own extra features for some applications to make certain tasks easier or to provide access to functionality which is not otherwise accessible to screen reader users.
NVDA is able to automatically announce appropriate row and column headers when navigating around tables in Microsoft Word. This firstly requires that the Report Table row / column headers option in NVDA's Document Formatting settings, found in the NVDA Settings dialog, be turned on. Secondly, NVDA needs to know which row or column contains the headers in any given table. After moving to the first cell in the column or row containing the headers, use one of the following commands:
| Name | Key | Description |
|---|---|---|
| Set column headers | NVDA+shift+c | Pressing this once tells NVDA this is the first header cell in the row that contains column headers, which should be automatically announced when moving between columns below this row. Pressing twice will clear the setting. |
| Set row headers | NVDA+shift+r | Pressing this once tells NVDA this is the first header cell in the column that contains row headers, which should be automatically announced when moving between rows after this column. Pressing twice will clear the setting. |
These settings will be stored in the document as bookmarks compatible with other screen readers such as JAWS. This means that users of other screen readers who open this document at a later date will automatically have the row and column headers already set.
Similar to the web, Browse mode can be used in Microsoft Word to allow you to use features such as Quick navigation and the Elements List. To toggle Browse mode on and off in Microsoft Word, press NVDA+space. For further information about Browse mode and Quick Navigation, see the Browse Mode section.
While in Browse mode in Microsoft Word, you can access the Elements List by pressing NVDA+f7. The Elements List can list headings, links, annotations (which includes comments and track changes) and errors (currently limited to spelling errors).
To report any comments at the current caret position, press NVDA+alt+c. All comments for the document, along with other tracked changes, can also be listed in the NVDA Elements List when selecting Annotations as the type.
NVDA is able to automatically announce appropriate row and column headers when navigating around Excel worksheets. This firstly requires that the Report Table row / column headers option in NVDA's Document Formatting settings, found in the NVDA Settings dialog, be turned on. Secondly, NVDA needs to know which row or column contains the headers. After moving to the first cell in the column or row containing the headers, use one of the following commands:
| Name | Key | Description |
|---|---|---|
| Set column headers | NVDA+shift+c | Pressing this once tells NVDA this is the first header cell in the row that contains column headers, which should be automatically announced when moving between columns below this row. Pressing twice will clear the setting. |
| Set row headers | NVDA+shift+r | Pressing this once tells NVDA this is the first header cell in the column that contains row headers, which should be automatically announced when moving between rows after this column. Pressing twice will clear the setting. |
These settings will be stored in the workbook as defined name ranges compatible with other screen readers such as JAWS. This means that users of other screen readers who open this workbook at a later date will automatically have the row and column headers already set.
Similar to the web, NVDA has an Elements List for Microsoft Excel that allows you to list and access several different types of information. To access the Elements List in Excel, press NVDA+f7. The various types of information available in the Elements List are:
To report any notes for the currently focused cell, press NVDA+alt+c. In Microsoft 2016, 365 and newer, the classic comments in Microsoft Excel have been renamed to "notes". All notes for the worksheet can also be listed in the NVDA Elements List after pressing NVDA+f7.
NVDA can also display a specific dialog for adding or editing a certain note. NVDA overrides the native MS Excel notes editing region due to accessibility constraints, but the key stroke for displaying the dialog is inherited from MS Excel and therefore works also without NVDA running. To add or edit a certain note, in a focused cell, press shift+f2.
This key stroke does not appear and cannot be changed in NVDA's input gesture dialog.
Note: it is possible to open the note editing region in MS Excel also from the context menu of any cell of the work sheet. However, this will open the inaccessible note editing region and not the NVDA specific note editing dialog.
In Microsoft Office 2016, 365 and newer, a new style comment dialog has been added. This dialog is accessible and provides more features such as replying to comments, etc. It can also be opened from the context menu of a certain cell. The comments added to the cells via the new style comment dialog are not related to "notes".
If a workbook has been protected, it may not be possible to move focus to particular cells that have been locked for editing. To allow moving to locked cells, switch to Browse Mode by pressing NVDA+space, and then use standard Excel movement commands such as the arrow keys to move around all cells on the current worksheet.
Excel worksheets can include form fields. You can access these using the Elements List or the f and shift+f form field single letter navigation keys. Once you move to a form field in browse mode, you can press enter or space to either activate it or switch to focus mode so you can interact with it, depending on the control. For further information about Browse mode and single letter navigation, see the Browse Mode section.
| Name | Key | Description |
|---|---|---|
| Toggle speaker notes reading | control+shift+s | When in a running slide show, this command will toggle between the speaker notes for the slide and the content for the slide. This only affects what NVDA reads, not what is displayed on screen. |
| Name | Key | Description |
|---|---|---|
| Report remaining time | control+shift+r | Reports the remaining time of the currently playing track, if any. |
| Report elapsed time | control+shift+e | Reports the elapsed time of the currently playing track, if any. |
| Report track length | control+shift+t | Reports the length of the currently playing track, if any. |
Note: The above shortcuts work only with the default formatting string for foobar's status line.
| Name | Key | Description |
|---|---|---|
| Report recent message | NVDA+control+1-4 | Reports one of the recent messages, depending on the number pressed; e.g. NVDA+control+2 reads the second most recent message. |
| Name | Key | Description |
|---|---|---|
| Report Comments Window | control+shift+c | Reports any comments in the comments window. |
| Report notes for translators | control+shift+a | Reports any notes for translators. |
NVDA supports reading and navigating books in Amazon Kindle for PC. This functionality is only available in Kindle books designated with "Screen Reader: Supported" which you can check on the details page for the book.
Browse mode is used to read books. It is enabled automatically when you open a book or focus the book area. The page will be turned automatically as appropriate when you move the cursor or use the say all command. You can manually turn to the next page with the pageDown key and turn to the previous page with the pageUp key.
Single letter navigation is supported for links and graphics, but only within the current page. Navigating by link also includes footnotes.
NVDA provides early support for reading and interactive navigation of mathematical content for books with accessible math. Please see the Reading Mathematical Content section for further information.
Kindle allows you to perform various functions on selected text, including obtaining a dictionary definition, adding notes and highlights, copying the text to the clipboard and searching the web. To do this, first select text as you normally would in browse mode; e.g. by using shift and the cursor keys. Once you have selected text, press the applications key or shift+f10 to show the available options for working with the selection. If you do this with no text selected, options will be shown for the word at the cursor.
You can add a note regarding a word or passage of text. To do this, first select the relevant text and access the selection options as described above. Then, choose Add Note.
When reading in browse mode, NVDA refers to these notes as comments.
To view, edit or delete a note:
When in the table view of added books:
| Name | Key | Description |
|---|---|---|
| Enter | enter | Opens the selected book. |
| Context menu | applications | Opens the context menu for the selected book. |
NVDA provides support for the Windows command console used by Command Prompt, PowerShell, and the Windows Subsystem for Linux. The console window is of fixed size, typically much smaller than the buffer that holds the output. As new text is written, the content scroll upwards and previous text is no longer visible. Text that is not visibly displayed in the window is not accessible with NVDA's text review commands. Therefore, it is necessary to scroll the console window to read earlier text. The following built-in Windows Console keyboard shortcuts may be useful when reviewing text with NVDA:
| Name | Key | Description |
|---|---|---|
| Scroll up | control+upArrow | Scrolls the console window up, so earlier text can be read. |
| Scroll down | control+downArrow | Scrolls the console window down, so later text can be read. |
| Scroll to start | control+home | Scrolls the console window to the beginning of the buffer. |
| Scroll to end | control+end | Scrolls the console window to the end of the buffer. |
Most configuration can be performed using dialog boxes accessed through the Preferences sub-menu of the NVDA menu. Many of these settings can be found in the multi-page NVDA Settings dialog. In all dialog boxes, press the OK button to accept any changes you have made. To cancel any changes, press the Cancel button or the escape key. For certain dialogs, you can press the Apply button to let the settings take effect immediately without closing the dialog. Some settings can also be changed using shortcut keys, which are listed where relevant in the sections below.
The NVDA Settings dialog contains many configuration parameters that can be changed. This dialog contains a list with several categories of settings to choose from. When you select a category, several settings related to this category will be shown in this dialog. These settings can be applied using the apply button, in which case the dialog will stay open. If you want to save your settings and close the NVDA Settings dialog, you can use the OK button.
Some settings categories have dedicated shortcut keys. If pressed, the shortcut key will open the NVDA Settings dialog in that particular category. By default, not all categories can be accessed with keyboard commands. If you wish to access categories which do not have dedicated shortcut keys, use the Input Gestures dialog to add a custom gesture such as a keyboard command or touch gesture for that category.
The settings categories found in the NVDA Settings dialog will be outlined below.
The General category of the NVDA Settings dialog sets NVDA's overall behaviour such as interface language and whether or not it should check for updates. This category contains the following options:
This is a combo box which allows you to select the language that NVDA's user interface and messages should be shown in. There are many languages, however the default option is "User Default, Windows". This option tells NVDA to use the language that Windows is currently set to.
Please note that NVDA must be restarted when changing the language. When the confirmation dialog appears, select "restart now" or "restart later" if you wish to use the new language now or at a later time, respectively. If "restart later" is selected, the configuration must be saved (either manually or using the save on exit functionality).
This option is a checkbox that, when checked, tells NVDA to automatically save the current configuration when you exit NVDA.
This option is a checkbox that allows you to choose whether or not a dialog appears when you exit NVDA that asks what action you want to perform. When checked, a dialog will appear when you attempt to exit NVDA asking whether you want to exit, restart, restart with add-ons disabled or install pending updates (if any). When unchecked, NVDA will exit immediately.
This option is a checkbox that, when checked, tells NVDA to play sounds when it starts or exits.
This is a combo box that lets you choose how much NVDA will log as it's running. Generally users should not need to touch this as not too much is logged. However, if you wish to provide information in a bug report, or enable or disable logging altogether, then it may be a useful option.
The available logging levels are:
If this option is enabled, NVDA will start automatically as soon as you sign in to Windows. This option is only available for installed copies of NVDA.
If you sign in to Windows by providing a user name and password, then enabling this option will make NVDA start automatically at the sign-in screen when Windows starts. This option is only available for installed copies of NVDA.
Pressing this button copies your currently saved NVDA user configuration to NVDA's system configuration directory, so that NVDA will use it during sign-in and when running on User Account Control (UAC) and other secure Windows screens. To make sure that all your settings are transferred, make sure to save your configuration first with control+NVDA+c or Save configuration in the NVDA menu. This option is only available for installed copies of NVDA.
If this is enabled, NVDA will automatically check for updated versions and inform you when an update is available. You can also manually check for updates by selecting Check for updates under Help in the NVDA menu. When manually or automatically checking for updates, it is necessary for NVDA to send some information to the update server in order to receive the correct update for your system. The following information is always sent:
If this is enabled, NV Access will use the information from update checks in order to track the number of NVDA users including particular demographics such as Operating system and country of origin. Note that although your IP address will be used to calculate your country during the update check, the IP address is never kept. Apart from the mandatory information required to check for updates, the following extra information is also currently sent:
This information greatly aides NV Access to prioritize future development of NVDA.
If this is enabled, NVDA will inform you when there is a pending update on startup, offering you the possibility to install it. You can also manually install the pending update from the Exit NVDA dialog (if enabled), from the NVDA menu, or when you perform a new check from the Help menu.
The Speech category in the NVDA Settings dialog contains options that lets you change the speech synthesizer as well as voice characteristics for the chosen synthesizer. For a quicker alternative way of controlling speech parameters from anywhere, please see the Synth Settings Ring section.
The Speech Settings category contains the following options:
The first option in the Speech Settings category is the Change... button. This button activates the Select Synthesizer dialog, which allows you to select the active speech synthesizer and output device. This dialog opens on top of the NVDA Settings dialog. Saving or dismissing the settings in the Select Synthesizer dialog will return you to the NVDA Settings dialog.
The Voice option is a combo box listing all the voices of the current synthesizer that you have installed. You can use the arrow keys to listen to all the various choices. Left and Up arrow take you up in the list, while right and down arrow move you down in the list.
If you are using the Espeak NG synthesizer which is packaged with NVDA, this is a combo box that allows you to select the Variant the synthesizer should speak with. ESpeak NG's Variants are rather like voices, as they provide slightly different attributes to the eSpeak NG voice. Some variants will sound like a male, some like a female, and some even like a frog. If using a third-party synthesizer, you may also be able to change this value if your chosen voice supports it.
This option allows you to change the rate of your voice. This is a slider that goes from 0 to 100 - 0 being the slowest, 100 being the fastest.
This option allows you to change the pitch of the current voice. It is a slider which goes from 0 to 100 - 0 being the lowest pitch and 100 being the highest.
This option is a slider which goes from 0 to 100 - 0 being the lowest volume and 100 being the highest.
This option is a slider that lets you choose how much inflection (rise and fall in pitch) the synthesizer should use to speak with.
This checkbox allows you to toggle whether NVDA should switch speech synthesizer languages automatically if the text being read specifies its language. This option is enabled by default.
This checkbox allows you to toggle whether or not dialect changes should be made, rather than just actual language changes. For example, if reading in an English U.S. voice but a document specifies that some text is in English U.K., then the synthesizer will switch accents if this option is enabled. This option is disabled by default.
Key: NVDA+p
This allows you to choose the amount of punctuation and other symbols that should be spoken as words. For example, when set to all, all symbols will be spoken as words. This option applies to all synthesizers, not just the currently active synthesizer.
On by default, this option tells NVDA if the current voice's language can be trusted when processing symbols and characters. If you find that NVDA is reading punctuation in the wrong language for a particular synthesizer or voice, you may wish to turn this off to force NVDA to use its global language setting instead.
When this checkbox is checked, NVDA will include additional symbol pronunciation dictionaries when pronouncing characters and symbols. These dictionaries contain descriptions for symbols (particularly emoji) that are provided by the Unicode Consortium as part of their Common Locale Data Repository. If you want NVDA to speak descriptions of emoji characters based on this data, you should enable this option. However, if you are using a speech synthesizer that supports speaking emoji descriptions natively, you may wish to turn this off.
Note that manually added or edited character descriptions are saved as part of your user settings. Therefore, if you change the description of a particular emoji, your custom description will be spoken for that emoji regardless of whether this option is enabled. You can add, edit or remove symbol descriptions in NVDA's punctuation/symbol pronunciation dialog.
To toggle Unicode Consortium data inclusion from anywhere, please assign a custom gesture using the Input Gestures dialog.
This edit field allows you to type the amount that the pitch of the voice will change when speaking a capital letter. This value is a percentage, where a negative value lowers the pitch and a positive value raises it. For no pitch change you would use 0. Usually, NVDA raises the pitch slightly for any capital letter, but some synthesizers may not support this well. In case pitch change for capitals is not supported, consider Say "cap" before capitals and/or Beep for capitals instead.
This setting is a checkbox that, when checked, tells NVDA to say the word "cap" before any capital letter when spoken as an individual character such as when spelling.
If this checkbox is checked, NVDA will make a small beep each time it encounters a capitalized character by itself.
Some words consist of only one character, but the pronunciation is different depending on whether the character is being spoken as an individual character (such as when spelling) or a word. For example, in English, "a" is both a letter and a word and is pronounced differently in each case. This option allows the synthesizer to differentiate between these two cases if the synthesizer supports this. Most synthesizers do support it.
This option should generally be enabled. However, some Microsoft Speech API synthesizers do not implement this correctly and behave strangely when it is enabled. If you are having problems with the pronunciation of individual characters, try disabling this option.
The Synthesizer dialog, which can be opened by activating the Change... button in the speech category of the NVDA settings dialog, allows you to select which Synthesizer NVDA should use to speak with. Once you have selected your synthesizer of choice, you can press Ok and NVDA will load the selected Synthesizer. If there is an error loading the synthesizer, NVDA will notify you with a message, and continue using the previous synthesizer.
This option allows you to choose the synthesizer you wish NVDA to use for speech output.
For a list of the Synthesizers that NVDA supports, please see the Supported Speech Synthesizers section.
One special item that will always appear in this list is "No speech", which allows you to use NVDA with no speech output whatsoever. This may be useful for someone who wishes to only use NVDA with braille, or perhaps to sighted developers who only wish to use the Speech Viewer.
This option allows you to choose the audio device that NVDA should instruct the selected synthesizer to speak through.
Key: NVDA+shift+d
On Windows 8 and above, this option allows you to choose if NVDA should lower the volume of other applications while NVDA is speaking, or all the time while NVDA is running.
This option is only available if NVDA has been installed. It is not possible to support audio ducking for portable and temporary copies of NVDA.
If you wish to quickly change speech settings without going to the Speech category of the NVDA settings dialog, there are some NVDA key commands that allow you to move through the most common speech settings from anywhere while running NVDA:
| Name | Desktop key | Laptop key | Description |
|---|---|---|---|
| Move to next synth setting | NVDA+control+rightArrow | NVDA+shift+control+rightArrow | Moves to the next available speech setting after the current, wrapping around to the first setting again after the last |
| Move to previous synth setting | NVDA+control+leftArrow | NVDA+shift+control+leftArrow | Moves to the next available speech setting before the current, wrapping around to the last setting after the first |
| Increment current synth setting | NVDA+control+upArrow | NVDA+shift+control+upArrow | increases the current speech setting you are on. E.g. increases the rate, chooses the next voice, increases the volume |
| Decrement current synth setting | NVDA+control+downArrow | NVDA+shift+control+downArrow | decreases the current speech setting you are on. E.g. decreases the rate, chooses the previous voice, decreases the volume |
The Braille category in the NVDA Settings dialog contains options that let you change several aspects of braille input and output. This category contains the following options:
The Change... button in the Braille category of the NVDA Settings dialog activates the Select Braille Display dialog, which allows you to select the active braille display. This dialog opens on top of the NVDA Settings dialog. Saving or dismissing the settings in the Select Braille Display dialog will return you to the NVDA Settings dialog.
The next option you will come to in this category is the braille output table combo box. In this combo box, you will find braille tables for different languages, braille standards and grades. The chosen table will be used to translate text into braille to be presented on your braille display. You can move from braille table to braille table in the list by using the arrow keys.
Complementary to the previous option, the next setting you will find is the braille input table combo box. The chosen table will be used to translate braille entered on your braille display's Perkins-style keyboard into text. You can move from braille table to braille table in the list by using the arrow keys.
Note that this option is only useful if your braille display has a Perkins-style keyboard and this feature is supported by the braille display driver. If input is not supported on a display which does have a braille keyboard, this will be noted in the Supported Braille Displays section.
This option allows the word that is under the cursor to be displayed in non-contracted computer braille.
This option allows the braille cursor to be turned on and off. It applies to the system caret and review cursor, but not to the selection indicator.
This option allows the braille cursor to blink. If blinking is turned off, the braille cursor will constantly be in the "up" position. The selection indicator is not affected by this option, it is always dots 7 and 8 without blinking.
This option is a numerical field that allows you to change the blink rate of the cursor in milliseconds.
This option allows you to choose the shape (dot pattern) of the braille cursor when braille is tethered to focus. The selection indicator is not affected by this option, it is always dots 7 and 8 without blinking.
This option allows you to choose the shape (dot pattern) of the braille cursor when braille is tethered to review. The selection indicator is not affected by this option, it is always dots 7 and 8 without blinking.
This option is a numerical field that controls how long NVDA messages are displayed on the braille display. Specifying 0 disables displaying of these messages completely. The NVDA message is imediately dismissed when pressing a routing key on the braille display, but appears again when pressing a corresponding key which triggers the message.
This option allows NVDA messages to be displayed on the braille display indefinitely.
Key: NVDA+control+t
This option allows you to choose whether the braille display will follow the system focus / caret, the navigator object / review cursor, or both. When "automatically" is selected, NVDA will follow the system focus and caret by default. In this case, when the navigator object or the review cursor position is changed by means of explicit user interaction, NVDA will tether to review temporarily, until the focus or the caret changes. If you want it to follow the focus and caret only, you need to configure braille to be tethered to focus. In this case, braille will not follow the NVDA navigator during object navigation or the review cursor during review. If you want braille to follow object navigation and text review instead, you need to configure braille to be tethered to review. In this case, Braille will not follow system focus and system caret.
If enabled, braille will be displayed by paragraphs instead of lines. Also, the next and previous line commands will move by paragraph accordingly. This means that you do not have to scroll the display at the end of each line even where more text would fit on the display. This may allow for more fluent reading of large amounts of text. It is disabled by default.
If this is enabled, a word which is too large to fit at the end of the braille display will not be split. Instead, there will be some blank space at the end of the display. When you scroll the display, you will be able to read the entire word. This is sometimes called "word wrap". Note that if the word is too large to fit on the display even by itself, the word must still be split.
If this is disabled, as much of the word as possible will be displayed, but the rest will be cut off. When you scroll the display, you will then be able to read the rest of the word.
Enabling this may allow for more fluent reading, but generally requires you to scroll the display more.
This option allows you to choose what context information NVDA will show on the braille display when an object gets focus. Context information refers to the hierarchy of objects containing the focus. For example, when you focus a list item, this list item is part of a list. This list might be contained by a dialog, etc. Please consult the section about object navigation for more information about the hierarchy that applies to objects in NVDA.
When set to fill display for context changes, NVDA will try to display as much context information as possible on the braille display, but only for the parts of the context that have changed. For the example above, this means that when changing focus to the list, NVDA will show the list item on the braille display. Furthermore, if there is enough space left on the braille display, NVDA will try to show that the list item is part of a list. If you then start moving through the list with your arrow keys, it is assumed that you are aware that you are still in the list. Thus, for the remaining list items you focus, NVDA will only show the focused list item on the display. In order for you to read the context again (i.e. that you are in a list and that the list is part of a dialog), you will have to scroll your braille display back.
When this option is set to always fill the display, NVDA will try to show as much context information as possible on the braille display, regardless of whether you have seen the same context information before. This has the advantage that NVDA will fit as much information as possible on the display. However, the downside is that there is always a difference in the position where the focus starts on the braille display. This can make it difficult to skim a long list of items, for example, as you will need to continually move your finger to find the start of the item. This was the default behaviour for NVDA 2017.2 and before.
When you set the focus context presentation option to only show the context information when scrolling back, NVDA never shows context information on your braille display by default. Thus, in the example above, NVDA will display that you focused a list item. However, in order for you to read the context (i.e. that you are in a list and that the list is part of a dialog), you will have to scroll your braille display back.
To toggle focus context presentation from anywhere, please assign a custom gesture using the Input Gestures dialog.
The Select Braille Display dialog, which can be opened by activating the Change... button in the Braille category of the NVDA settings dialog, allows you to select which Braille display NVDA should use for braille output. Once you have selected your braille display of choice, you can press Ok and NVDA will load the selected display. If there is an error loading the display driver, NVDA will notify you with a message, and continue using the previous display, if any.
This combo box presents you with several options depending on what braille display drivers are available on your system. Move between these options with the arrow keys.
The automatic option will allow NVDA to search for many supported braille displays in the background. When this feature is enabled and you connect a supported display using USB or bluetooth, NVDA will automatically connect with this display.
No braille means that you are not using braille.
Please see the Supported Braille Displays section for more information about supported braille displays and which of these support automatic detection in the background.
This option, if available, allows you to choose what port or type of connection will be used to communicate with the braille display you have selected. It is a combo box containing the possible choices for your braille display.
By default, NVDA employs automatic port detection, which means the connection with the braille device will be established automatically by scanning for available USB and bluetooth devices on your system. However, for some braille displays, you may be able to explicitly choose what port should be used. Common options are "Automatic" (which tells NVDA to employ the default automatic port selection procedure), "USB", "Bluetooth" and legacy serial communication ports if your braille display supports this type of communication.
This option won't be available if your braille display only supports automatic port detection.
You may consult the documentation for your braille display in the section Supported Braille Displays to check for more details on the supported types of communication and available ports.
The Vision category in the NVDA Settings dialog allows you to enable, disable and configure visual aids.
Note that the available options in this category could be extended by NVDA add-ons. By default, this settings category contains the following options:
The check boxes in the Focus Highlight grouping control the behaviour of NVDA's built-in Focus Highlight facility.
Note that checking and unchecking the "Enable Highlighting" check box wil also change the state of the tree other check boxes accordingly. Therefore, if "Enable Highlighting" is off and you check this check box, the other tree check boxes will also be checked automatically. If you only want to highlight the focus and leave the navigator object and browse mode check boxes unchecked, the state of the "Enable Highlighting" check box will be half checked.
You can enable the Screen Curtain by checking the "Make screen black (immediate effect)" check box. A warning that your screen will become black after activation will be displayed. Before continuing (selecting "Yes"), ensure you have enabled speech / braille and will be able to control your computer without the use of the screen. Select "No" if you no longer wish to enable the Screen Curtain. If you are sure, you can choose the Yes button to enable the screen curtain. If you no longer want to see this warning message every time, you can change this behaviour in the dialog that displays the message. You can always restore the warning by checking the "Always show a warning when loading Screen Curtain" check box next to the "Make screen black" check box.
To toggle the Screen Curtain from anywhere, please assign a custom gesture using the Input Gestures dialog.
By default, sounds are played when the Screen Curtain is toggled. When you want to change this behaviour, you can uncheck the "Play sound when toggling Screen Curtain" check box.
Additional vision enhancement providers can be provided in NVDA add-ons. When these providers have adjustable settings, they will be shown in this settings category in separate groupings. For the supported settings per provider, please refer to the documentation for that provider.
The Keyboard category in the NVDA Settings dialog contains options that set how NVDA behaves as you use and type on your keyboard. This settings category contains the following options:
This combo box lets you choose what type of keyboard layout NVDA should use. Currently the two that come with NVDA are Desktop and Laptop.
The checkboxes in this list control what keys can be used as NVDA modifier keys. The following keys are available to choose from:
If no key is chosen as the NVDA key it may be impossible to access certain NVDA commands. Therefore, The NVDA settings dialog will display an error message if all keys are unselected when pressing Ok or Apply. After dismissing the error message, you must select at least one before being able to press Ok to dismiss the dialog properly.
Key: NVDA+2
When enabled, NVDA will announce all characters you type on the keyboard.
Key: NVDA+3
When enabled, NVDA will announce all words you type on the keyboard.
If on, this option will cause speech to be interrupted each time a character is typed. This is on by default.
If on, this option will cause speech to be interrupted each time the Enter key is pressed. This is on by default.
If on, certain navigation commands (such as quick navigation in browse mode or moving by line or paragraph) do not stop Say All, rather Say All jumps to the new position and continues reading.
When enabled, a warning beep will be heard if a letter is typed with the shift key while Caps Lock is on. Generally, typing shifted letters with Caps Lock is unintentional and is usually due to not realizing that Caps Lock is enabled. Therefore, it can be quite helpful to be warned about this.
Key: NVDA+4
When enabled, NVDA will announce all non-character keys you type on the keyboard. This includes key combinations such as control plus another letter.
When enabled, a short buzzer sound will be played when a word you type contains a spelling error. This option is only available if reporting of spelling errors is enabled in NVDA's Document Formatting Settings, found in the NVDA Settings dialog.
This option allows the user to control if key presses generated by applications such as on-screen keyboards and speech recognition software should be processed by NVDA. This option is on by default, though certain users may wish to turn this off, such as those typing Vietnamese with the UniKey typing software as it will cause incorrect character input.
The Mouse category in the NVDA Settings dialog allows NVDA to track the mouse, play mouse coordinate beeps and sets other mouse usage options. This category contains the following options:
A checkbox, that when checked means that NVDA will announce the shape of the mouse pointer each time it changes. The mouse pointer in Windows changes shape to convey certain information such as when something is editable, or when something is loading etc.
Key: NVDA+m
When enabled, NVDA will announce the text currently under the mouse pointer, as you move it around the screen. This allows you to find things on the screen, by physically moving the mouse, rather than trying to find them through object navigation.
If NVDA is set to announce the text under the mouse as you move it, this option allows you to choose exactly how much text will be spoken. The options are character, word, line and paragraph.
To toggle text unit resolution from anywhere, please assign a custom gesture using the Input Gestures dialog.
If this checkbox is checked, NVDA will announce the role (type) of object as the mouse moves inside it.
Checking this checkbox makes NVDA play beeps as the mouse moves, so that the user can work out where the mouse is in regards to the dimensions of the screen. The higher the mouse is on the screen, the higher the pitch of the beeps. The further left or right the mouse is located on the screen, the further left or right the sound will be played (assuming the user has stereo speakers or headphones).
If the "play audio coordinates when mouse moves" checkbox is checked, then checking this checkbox means that the volume of the audio coordinates beeps is controlled by how bright the screen is under the mouse. This setting is unchecked by default.
This option allows the user to ignore mouse events (including mouse movement and button presses) generated by other applications such as TeamViewer and other remote control software. This option is unchecked by default. If you check this option and you have the "Enable mouse tracking" option enabled, NVDA will not announce what is under the mouse if the mouse is moved by another application.
This settings category, only available on computers running Windows 8 and later with touch capabilities, allows you to configure how NVDA interacts with touchscreens. This category contains the following options:
This checkbox enables NVDA's touch interaction support. If enabled, you can use your fingers to navigate and interact with items on screen using a touchscreen device. If disabled, touchscreen support will be disabled as though NVDA is not running. This setting can also be toggled using NVDA+control+alt+t.
This checkbox allows you to specify the method you wish to use when entering text using the touch keyboard. If this checkbox is checked, when you locate a key on the touch keyboard, you can lift your finger and the selected key will be pressed. If this is unchecked, you need to double-tap on the key of the touch keyboard to press the key.
The Review Cursor category in the NVDA Settings dialog is used to configure NVDA's review cursor behaviour. This category contains the following options:
Key: NVDA+7
When enabled, The review cursor will always be placed in the same object as the current system focus whenever the focus changes.
Key: NVDA+6
When enabled, the review cursor will automatically be moved to the position of the System caret each time it moves.
When enabled, the review cursor will follow the mouse as it moves.
When enabled, NVDA will filter the hierarchy of objects that can be navigated to exclude objects that aren't of interest to the user; e.g. invisible objects and objects used only for layout purposes.
To toggle simple review mode from anywhere, please assign a custom gesture using the Input Gestures dialog.
The Object Presentation category in the NVDA Settings dialog is used to set how much information NVDA will present about controls such as description, position information and so on. This category contains the following options:
A checkbox that when checked tells NVDA to report tooltips as they appear. Many Windows and controls show a small message (or tooltip) when you move the mouse pointer over them, or sometimes when you move the focus to them.
This checkbox, when checked, tells NVDA to report help balloons and toast notifications as they appear.
When this checkbox is checked, NVDA will include the shortcut key that is associated with a certain object or control when it is reported. For example the File menu on a menu bar may have a shortcut key of alt+f.
This option lets you choose whether you wish to have an object's position (e.g. 1 of 4) reported when moving to the object with the focus or object navigation.
If reporting of object position information is turned on, this option allows NVDA to guess object position information when it is otherwise unavailable for a particular control.
When on, NVDA will report position information for more controls such as menus and toolbars, however this information may be slightly inaccurate.
Uncheck this checkbox if you don't wish to have the description reported along with objects (i.e. search suggestions, reporting of whole dialog window right after the dialog opens, etc.).
Key: NVDA+u
This option controls how NVDA reports progress bar updates to you.
It has the following options:
This is an option that, when checked, tells NVDA to keep reporting a progress bar, even if it is not physically in the foreground. If you minimize or switch away from a window that contains a progress bar, NVDA will keep track of it, allowing you to do other things while NVDA tracks the progress bar.
Key: NVDA+5
Toggles the announcement of new content in particular objects such as terminals and the history control in chat programs.
Toggles announcement of appearance of auto-suggestions, and if enabled, NVDA will play a sound to indicate this. Auto-suggestions are lists of suggested entries based on text entered into certain edit fields and documents. For example, when you enter text into the search box in Start menu in Windows Vista and later, Windows displays a list of suggestions based on what you typed. For some edit fields such as search fields in various Windows 10 apps, NVDA can notify you that a list of suggestions has appeared when you type text. The auto-suggestions list will close once you move away from the edit field, and for some fields, NVDA can notify you of this when this happens.
The Input Composition category allows you to control how NVDA reports the input of Asian characters, such as with IME or Text Service input methods. Note that due to the fact that input methods vary greatly by available features and by how they convey information, it will most likely be necessary to configure these options differently for each input method to get the most efficient typing experience.
This option, which is on by default, allows you to choose whether or not all visible candidates should be reported automatically when a candidate list appears or its page is changed. Having this option on for pictographic input methods such as Chinese New ChangJie or Boshiami is useful, as you can automatically hear all symbols and their numbers and you can choose one right away. However, for phonetic input methods such as Chinese New Phonetic, it may be more useful to turn this option off, as all the symbols will sound the same and you will have to use the arrow keys to navigate the list items individually to gain more information from the character descriptions for each candidate.
This option, which is on by default, allows you to choose whether NVDA should announce the selected candidate when a candidate list appears or when the selection is changed. For input methods where the selection can be changed with the arrow keys (such as Chinese New Phonetic) this is necessary, but for some input methods it may be more efficient typing with this option turned off. Note that even with this option off, the review cursor will still be placed on the selected candidate allowing you to use object navigation / review to manually read this or other candidates.
This option, which is on by default, allows you to choose whether or not NVDA should provide a short description for each character in a candidate, either when it's selected or when it's automatically read when the candidate list appears. Note that for locales such as Chinese, the announcement of extra character descriptions for the selected candidate is not affected by this option. This option may be useful for Korean and Japanese input methods.
Some input methods such as Chinese New Phonetic and New ChangJie have a reading string (sometimes known as a precomposition string). You can choose whether or not NVDA should announce new characters being typed into this reading string with this option. This option is on by default. Note some older input methods such as Chinese ChangJie may not use the reading string to hold precomposition characters, but instead use the composition string directly. Please see the next option for configuring reporting of the composition string.
After reading or precomposition data has been combined into a valid pictographic symbol, most input methods place this symbol into a composition string for temporary storage along with other combined symbols before they are finally inserted into the document. This option allows you to choose whether or not NVDA should report new symbols as they appear in the composition string. This option is on by default.
The Browse Mode category in the NVDA Settings dialog is used to configure NVDA's behaviour when you read and navigate complex documents such as web pages. This category contains the following options:
This field sets the maximum length of a line in browse mode (in characters).
This field sets the amount of lines you will move by when pressing page up or page down while in browse mode.
Key: NVDA+v
This option allows you to specify whether content in browse mode should place content such as links and other fields on their own line, or if it should keep them in the flow of text as it is visually shown. If the option is enabled then things will stay as they are visually shown, but if it is disabled then fields will be placed on their own line.
This checkbox toggles whether browse mode should be automatically enabled when loading a page. When this option is disabled, browse mode can still be manually activated on pages or in documents where browse mode is supported. See the Browse Mode section for a list of applications supported by browse mode. Note that this option does not apply to situations where browse mode is always optional, e.g. in Microsoft Word. This option is enabled by default.
This checkbox toggles the automatic reading of a page after it loads in browse mode. This option is enabled by default.
This option affects how NVDA handles tables used purely for layout purposes. When on, NVDA will treat these as normal tables, reporting them based on Document Formatting Settings and locating them with quick navigation commands. When off, they will not be reported nor found with quick navigation. However, the content of the tables will still be included as normal text. This option is turned off by default.
To toggle inclusion of layout tables from anywhere, please assign a custom gesture using the Input Gestures dialog.
Please see the options in the Document Formatting category of the NVDA Settings dialog to configure the fields that are reported when navigating, such as links, headings and tables.
This option allows focus mode to be invoked if focus changes. For example, when on a web page, if you press tab and you land on a form, if this option is checked, focus mode will automatically be invoked.
This option, when checked, allows NVDA to enter and leave focus mode when using arrow keys. For example, if arrowing down a web page and you land on an edit box, NVDA will automatically bring you into focus mode. If you arrow out of the edit box, NVDA will put you back in browse mode.
If this option is enabled, NVDA will play special sounds when it switches between browse mode and focus mode, rather than speaking the change.
Enabled by default, this option allows you to choose if gestures (such as key presses) that do not result in an NVDA command and are not considered to be a command key in general, should be trapped from going through to the document you are currently focused on. As an example, if enabled and the letter j was pressed, it would be trapped from reaching the document, even though it is not a quick navigation command nor is it likely to be a command in the application itself. In this case NVDA will tell Windows to play a default sound whenever a key which gets trapped is pressed.
Key: NVDA+8
Disabled by default, this option allows you to choose if the system focus should automatically be set to elements that can take the system focus (links, form fields, etc.) when navigating content with the browse mode caret. Leaving this option disabled will not automatically focus focusable elements when they are selected with the browse mode caret. This might result in faster browsing experience and better responsiveness in browse mode. The focus will yet be updated to the particular element when interacting with it (e.g. pressing a button, checking a check box). Enabling this option may improve support for some websites at the cost of performance and stability.
Most of the checkboxes in this category are for configuring what type of formatting you wish to have reported as you move the cursor around documents. For example, if you check the report font name checkbox, each time you arrow onto text with a different font, the name of the font will be announced.
The document formatting options are organized into groups. You can configure reporting of:
To toggle these settings from anywhere, please assign custom gestures using the Input Gestures dialog.
If enabled, this setting tells NVDA to try and detect all the formatting changes on a line as it reports it, even if doing this may slow down NVDA's performance.
By default, NVDA will detect the formatting at the position of the System caret / Review Cursor, and in some instances may detect formatting on the rest of the line, only if it is not going to cause a performance decrease.
Enable this option while proof reading documents in applications such as WordPad, where formatting is important.
This option allows you to configure how indentation at the beginning of lines is reported. The Report line indentation with combo box has four options.
The settings in this category allow you to configure Windows 10 OCR. This category contains the following options:
This combo box allows you to choose the language to be used for text recognition.
Warning! The settings in this category are for advanced users and may cause NVDA to not function correctly if configured in the wrong way. Only make changes to these settings if you are sure you know what you are doing or if you have been specifically instructed to by an NVDA developer.
In order to make changes to the advanced settings, the controls must be enabled by confirming, with the checkbox, that you understand the risks of modifying these settings
The button restores the default values for the settings, even if the confirmation checkbox is not ticked. After changing settings you may wish to revert to the default values. This may also be the case if you are unsure if the settings have been changed.
When developing add-ons for NVDA, it is useful to be able to test code as you are writing it. This option when enabled, allows NVDA to load custom appModules, globalPlugins, brailleDisplayDrivers and synthDrivers, from a special developer scratchpad directory in your NVDA user configuration directory. Previously NVDA would load custom code directly from the user configuration directory, with no way of disabling this. This option is off by default, ensuring that no untested code is ever run in NVDA with out the user's explicit knowledge. If you wish to distribute custom code to others, you should package it as an NVDA add-on.
This button opens the directory where you can place custom code while developing it. This button is only enabled if NVDA is configured to enable loading custom code from the Developer Scratchpad Directory.
This option changes how NVDA registers for events fired by the Microsoft UI Automation accessibility API. When this option is disabled, NVDA registers for many UIA events that are processed and discarded within NVDA itself. This has a major negative impact on performance, especially in applications like Microsoft Visual Studio. Therefore, when this option is enabled, NVDA will limit event registration to the system focus for most events. If you suffer from performance issues in one or more applications, We recommend you to try this functionality to see whether performance improves.
When this option is enabled, NVDA will try to use the Microsoft UI Automation accessibility API in order to fetch information from Microsoft Word document controls. This includes Microsoft Word itself, and also the Microsoft Outlook message viewer and composer. For the most recent versions of Microsoft Office 2016/365 running on windows 10, UI Automation support is complete enough to provide access to Microsoft Word documents almost equal to NVDA's existing Microsoft Word support, with the added advantage that responsiveness is majorly increased. However, There may be some information which is either not exposed, or exposed incorrectly in some versions of Microsoft Office, which means this UI automation support cannot always be relied upon. We still do not recommend that the majority of users turn this on by default, though we do welcome users of Office 2016/365 to test this feature and provide feedback.
When this option is enabled, NVDA will use a new, work in progress version of its support for Windows Console which takes advantage of accessibility improvements made by Microsoft. This feature is highly experimental and is still incomplete, so its use is not yet recommended. However, once completed, it is anticipated that this new support will become the default, improving NVDA's performance and stability in Windows command consoles.
This setting controls whether characters are spoken by speak typed characters or speak typed words in situations where the screen does not update (such as password entry) in the Windows Console with UI automation support enabled. For security purposes, this setting should be left disabled. However, you may wish to enable it if you experience performance issues or instability with typed character and/or word reporting while using NVDA's new experimental console support.
This option enables an alternative method for detecting typed characters in Windows command consoles. While it improves performance and prevents some console output from being spelled out, it may be incompatible with some terminal programs. This feature is available and enabled by default on Windows 10 versions 1607 and later when UI Automation is unavailable or disabled. Warning: with this option enabled, typed characters that do not appear onscreen, such as passwords, will not be suppressed. In untrusted environments, you may temporarily disable speak typed characters and speak typed words when entering passwords.
This option enables behaviour which attempts to cancel speech for expired focus events. In particular moving quickly through messages in Gmail with Chrome can cause NVDA to speak outdated information. This functionality is experimental as of NVDA 2020.2.
This option allows you to configure the number of milliseconds NVDA will wait for the caret (insertion point) to move in editable text controls. If you find that NVDA seems to be incorrectly tracking the caret E.g. it seems to be always one character behind or is repeating lines, then you may wish to try increasing this value.
The checkboxes in this list allow you to enable specific categories of debug messages in NVDA's log. Logging these messages can resort in decreased performance and large log files. Only turn one of these on if specifically instructed to by an NVDA developer e.g. when debugging why a braille display driver is not functioning correctly.
Besides the NVDA Settings dialog, The Preferences sub-menu of the NVDA Menu contains several other items which are outlined below.
The speech dictionaries menu (found in the Preferences menu) contains dialogs that allow you to manage the way NVDA pronounces particular words or phrases. There are currently three different types of speech dictionaries. They are:
You need to assign custom gestures using the Input Gestures dialog if you wish to open any of these dictionary dialogs from anywhere.
All dictionary dialogs contain a list of rules which will be used for processing the speech. The dialog also contains Add, Edit and Remove buttons.
To add a new rule to the dictionary, press the Add button, and fill in the fields in the dialog box that appears and then press Ok. You will then see your new rule in the list of rules. However, to make sure your rule is actually saved, make sure to press Ok to exit the dictionary dialog completely once you have finished adding/editing rules.
The rules for NVDA's speech dictionaries allow you to change one string of characters into another. For example, you could create a rule which causes NVDA to say the word "frog" instead of "bird" whenever the word "bird" is encountered. In the Add rule dialog, the easiest way to do this is to type the word bird in the Pattern field, and the word frog in the Replacement field. You may also want to type a description of the rule in the Comment field (something like: changes bird to frog).
NVDA's speech dictionaries however are much more powerful than simple word replacement. The Add rule dialog also contains a checkbox to say whether or not you want the rule to be case sensitive (meaning that NVDA should care whether the characters are uppercase or lowercase. NVDA ignores case by default).
Finally, a set of radio buttons allows you to tell NVDA whether your pattern should match anywhere, should only match if it is a complete word or should be treated as a "Regular expression". Setting the pattern to match as a whole word means that the replacement will only be made if the pattern does not occur as part of a larger word. This condition is met if the characters immediately before and after the word are anything other than a letter, a number, or an underscore, or if there are no characters at all. Thus, using the earlier example of replacing the word "bird" with "frog", if you were to make this a whole word replacement, it would not match "birds" or "bluebird".
A regular expression is a pattern containing special symbols that allow you to match on more than one character at a time, or match on just numbers, or just letters, as a few examples. Regular expressions are not covered in this user guide. For an introductory tutorial, please refer to [https://docs.python.org/3.7/howto/regex.html].
This dialog allows you to change the way punctuation and other symbols are pronounced, as well as the symbol level at which they are spoken.
The language for which symbol pronunciation is being edited will be shown in the dialog's title. Note that this dialog respects the "Trust voice's language for processing symbols and characters" option found in the Speech category of the NVDA Settings dialog; i.e. it uses the voice language rather than the NVDA global language setting when this option is enabled.
To change a symbol, first select it in the Symbols list. You can filter the symbols by entering the symbol or a part of the symbol's replacement into the Filter by edit box.
You can add new symbols by pressing the Add button. In the dialog that appears, enter the symbol and press the OK button. Then, change the fields for the new symbol as you would for other symbols.
You can remove a symbol you previously added by pressing the Remove button.
When you are finished, press the OK button to save your changes or the Cancel button to discard them.
In this dialog, you can customize the input gestures (keys on the keyboard, buttons on a braille display, etc.) for NVDA commands.
Only commands that are applicable immediately before the dialog is opened are shown. For example, if you want to customize commands related to browse mode, you should open the Input Gestures dialog while you are in browse mode.
The tree in this dialog lists all of the applicable NVDA commands grouped by category. You can filter them by entering one or more words from the command's name into the Filter by edit box in any order. Any gestures associated with a command are listed beneath the command.
To add an input gesture to a command, select the command and press the Add button. Then, perform the input gesture you wish to associate; e.g. press a key on the keyboard or a button on a braille display. Often, a gesture can be interpreted in more than one way. For example, if you pressed a key on the keyboard, you may wish it to be specific to the current keyboard layout (e.g. desktop or laptop) or you may wish it to apply for all layouts. In this case, a menu will appear allowing you to select the desired option.
To remove a gesture from a command, select the gesture and press the Remove button.
The Emulated system keyboard keys category contains NVDA commands that emulate keys on the system keyboard. These emulated system keyboard keys can be used to control a system keyboard right from your braille display. To add an emulated input gesture, select the Emulated system keyboard keys category and press the Add button. Then, press the key on the keyboard you wish to emulate. After that, the key will be available from the Emulated system keyboard keys category and you will be able to assign an input gesture to it as described above.
Note:
When you are finished making changes, press the OK button to save them or the Cancel button to discard them.
By default NVDA will automatically save your settings on exit. Note, however, that this option can be changed under the general options in the preferences menu. To save the settings manually at any time, choose the Save configuration item in the NVDA menu.
If you ever make a mistake with your settings and need to revert back to the saved settings, choose the "revert to saved configuration" item in the NVDA menu. You can also reset your settings to their original factory defaults by choosing Reset Configuration To Factory Defaults, which is also found in the NVDA menu.
The following NVDA key commands are also useful:
| Name | Desktop key | Laptop key | Description |
|---|---|---|---|
| Save configuration | NVDA+control+c | NVDA+control+c | Saves your current configuration so that it is not lost when you exit NVDA |
| Revert configuration | NVDA+control+r | NVDA+control+r | Pressing once resets your configuration to when you last saved it. Pressing three times will reset it back to factory defaults. |
Sometimes, you may wish to have different settings for different situations. For example, you may wish to have reporting of indentation enabled while you are editing or reporting of font attributes enabled while you are proofreading. NVDA allows you to do this using configuration profiles.
A configuration profile contains only those settings which are changed while the profile is being edited. Most settings can be changed in configuration profiles except for those in the General category of the NVDA Settings dialog, which apply to the entirety of NVDA.
Configuration profiles can be manually activated either from a dialog or using custom added gestures. They can also be activated automatically due to triggers such as switching to a particular application.
You manage configuration profiles by selecting "Configuration profiles" in the NVDA menu. You can also do this using a key command:
The first control in this dialog is the profile list from which you can select one of the available profiles. When you open the dialog, the profile you are currently editing is selected. Additional information is also shown for active profiles, indicating whether they are manually activated, triggered and/or being edited.
To rename or delete a profile, press the Rename or Delete buttons, respectively.
Press the Close button to close the dialog.
To create a profile, press the New button.
In the New Profile dialog, you can enter a name for the profile. You can also select how this profile should be used. If you only want to use this profile manually, select Manual activation, which is the default. Otherwise, select a trigger which should automatically activate this profile. For convenience, if you haven't entered a name for the profile, selecting a trigger will fill in the name accordingly. See below for more information about triggers.
Pressing OK will create the profile and close the Configuration Profiles dialog so you can edit it.
You can manually activate a profile by selecting a profile and pressing the Manual activate button. Once activated, other profiles can still be activated due to triggers, but any settings in the manually activated profile will override them. For example, if a profile is triggered for the current application and reporting of links is enabled in that profile but disabled it in the manually activated profile, links will not be reported. However, if you have changed the voice in the triggered profile but have never changed it in the manually activated profile, the voice from the triggered profile will be used. Any settings you change will be saved in the manually activated profile. To deactivate a manually activated profile, select it in the Configuration Profiles dialog and press the Manual deactivate button.
Pressing the Triggers button in the Configuration Profiles dialog allows you to change the profiles which should be automatically activated for various triggers.
The Triggers list shows the available triggers, which are as follows:
To change the profile which should be automatically activated for a trigger, select the trigger and then select the desired profile from the Profile list. You can select "(normal configuration)" if you don't want a profile to be used.
Press the Close button to return to the Configuration Profiles dialog.
If you have manually activated a profile, any settings you change will be saved to that profile. Otherwise, any settings you change will be saved to the most recently triggered profile. For example, if you have associated a profile with the Notepad application and you switch to Notepad, any changed settings will be saved to that profile. Finally, if there is neither a manually activated nor a triggered profile, any settings you change will be saved to your normal configuration.
To edit the profile associated with say all, you must manually activate that profile.
Sometimes, it is useful to temporarily disable all triggers. For example, you might wish to edit a manually activated profile or your normal configuration without triggered profiles interfering. You can do this by checking the Temporarily disable all triggers checkbox in the Configuration Profiles dialog.
To toggle disabling triggers from anywhere, please assign a custom gesture using the Input Gestures dialog.
For every profile you add, you are able to assign one or more input gestures to activate it. By default, configuration profiles do not have input gestures assigned. You can add gestures to activate a profile using the Input Gestures dialog. Every profile has its own entry under the configuration profiles category. When you rename a profile, any gesture you added previously will still be available. Removing a profile will automatically delete the gestures associated with it.
Portable versions of NVDA store all settings and add-ons in a directory called userConfig, found in the NVDA directory.
Installed versions of NVDA store all settings and add-ons in a special NVDA directory located in your Windows user profile. This means that each user on the system can have their own NVDA settings. To open your settings directory from anywhere you can use Input Gestures dialog to add a custom gesture. In addition for an installed version of NVDA, on the start menu you can go to programs -> NVDA -> explore user configuration directory.
Settings for NVDA when running during sign-in or on UAC screens are stored in the systemConfig directory in NVDA's installation directory. Usually, this configuration should not be touched. To change NVDA's configuration during sign-in or on UAC screens, configure NVDA as you wish while signed into Windows, save the configuration, and then press the "use currently saved settings during sign-in and on secure screens" button in the General category of the NVDA Settings dialog.
The log viewer, found under Tools in the NVDA menu, allows you to view all the logging output that has occurred up until now from when you last started NVDA. Using NVDA+F1 will open the log viewer and display developer information about the current navigator object.
Apart from reading the content, you can also Save a copy of the log file, or refresh the viewer so that it shows the most recent output since the Log viewer was opened. These actions are available under the viewer's Log menu.
For sighted software developers or people demoing NVDA to sighted audiences, a floating window is available that allows you to view all the text that NVDA is currently speaking.
To enable the speech viewer, check the "Speech Viewer" menu item under Tools in the NVDA menu. Uncheck the menu item to disable it.
The speech viewer window contains a check box labelled "Show speech viewer on startup". If this is checked, the speech viewer will open when NVDA is started. The speech viewer window will always attempt to re-open with the same dimensions and location as when it was closed.
While the speech viewer is enabled, it constantly updates to show you the most current text being spoken. However, if you click or focus inside the viewer, NVDA will temporarily stop updating the text, so that you are able to easily select or copy the existing content.
To toggle the speech viewer from anywhere, please assign a custom gesture using the Input Gestures dialog.
For sighted software developers or people demoing NVDA to sighted audiences, a floating window is available that allows you to view braille output, and the text equivalent for each braille character. The braille viewer can be used at the same time as a physical braille display, it will match the number of cells on the physical device. While the braille viewer is enabled, it constantly updates to show you the braille that would be displayed on a physical braille display.
To enable the braille viewer, check the "Braille Viewer" menu item under Tools in the NVDA menu. Uncheck the menu item to disable it.
Physical braille displays typically have buttons to scroll forwards or backwards, to enable scrolling with the braille viewer tool use the Input Gestures dialog to assign keyboard shortcuts which "Scrolls the braille display back" and "Scrolls the braille display forward"
The braille viewer window contains a check box labelled "Show braille viewer on startup". If this is checked, the braille viewer will open when NVDA is started. The braille viewer window will always attempt to re-open with the same dimensions and location as when it was closed.
The NVDA Python console, found under Tools in the NVDA menu, is a development tool which is useful for debugging, general inspection of NVDA internals or inspection of the accessibility hierarchy of an application. For more information, please see the NVDA Developer Guide.
The Add-ons Manager, accessed by selecting Manage add-ons under Tools in the NVDA menu, allows you to install, uninstall, enable and disable add-on packages for NVDA. These packages are provided by the community and contain custom code that may add or change features in NVDA or even provide support for extra Braille displays or speech synthesizers.
The Add-ons Manager contains a list that displays all the add-ons currently installed in your NVDA user configuration. Package name, status, version and author are shown for each add-on, though further information such as a description and URL can be viewed by selecting the add-on and pressing the About add-on button. If there is help available for the selected add-on, you can access it by pressing the Add-on help button.
To browse and download available add-ons online, press the Get add-ons button. This button opens the NVDA Add-ons page. If NVDA is installed and running on your system, you can open the add-on directly from the browser to begin the installation process as described below. Otherwise, save the add-on package and follow the instructions below.
To install an Add-on you previously obtained, press the Install button. This will allow you to browse for an add-on package (.nvda-addon file) somewhere on your computer or on a network. Once you press Open, the installation process will begin.
When an add-on is being installed, NVDA will first ask you to confirm that you really wish to install the add-on. As the functionality of add-ons is unrestricted inside NVDA, which in theory could include accessing your personal data or even the entire system if NVDA is an installed copy, it is very important to only install add-ons from sources you trust. Once the add-on is installed, NVDA must be restarted for the add-on to start running. Until you do, a status of "install" will show for that add-on in the list.
To remove an add-on, select the add-on from the list and press the Remove button. NVDA will ask if you really wish to do this. As with installing, NVDA must be restarted for the add-on to be fully removed. Until you do, a status of "remove" will be shown for that add-on in the list.
To disable an add-on, press the "disable" button. To enable a previously disabled add-on, press the "enable" button. You can disable an add-on if the add-on status indicates it is "enabled", or enable it if the add-on is "disabled". For each press of the enable/disable button, add-on status changes to indicate what will happen when NVDA restarts. If the add-on was previously "disabled", a status will show "enabled after restart". If the add-on was previously "enabled", a status will show "disabled after restart". Just like when you install or remove add-ons, you need to restart NVDA in order for changes to take effect.
The manager also has a Close button to close the dialog. If you have installed, removed or changed the status of an add-on, NVDA will first ask you if you wish to restart so that your changes can take effect.
Some older add-ons may no longer be compatible with the version of NVDA that you have. When using an older version of NVDA, some new add-ons may not be compatible either. Attempting to install an incompatible add-on will result in an error explaining why the add-on is considered incompatible. To inspect these incompatible add-ons, you can use the "view incompatible add-ons" button to launch the incompatible add-ons manager.
To access the Add-ons Manager from anywhere, please assign a custom gesture using the Input Gestures dialog.
The Incompatible Add-ons Manager, which can be accessed via the "view incompatible add-ons" button in the Add-on manager, allows you to inspect any incompatible add-ons, and the reason they are considered incompatible. Add-ons are considered incompatible when they have not been updated to work with significant changes to NVDA, or when they rely on a feature not available in the version of NVDA you are using. The Incompatible add-ons manager has a short message to explain its purpose as well as the version of NVDA. The incompatible add-ons are presented in a list with the following columns:
The Incompatible add-ons manager also has an "About add-on..." button. This dialog will provide you with the full details of the add-on, which is helpful when contacting the add-on author.
This will open a dialog which allows you to create a portable copy of NVDA out of the installed version. Either way, when running a portable copy of NVDA, in the extra tool sub menu the menu item will be called "install NVDA on this PC" instead of "create portable copy).
The dialog to create a portable copy of NVDA or to install NVDA on this PC will prompt you to choose a folder path in which NVDA should create the portable copy or in which NVDA should be installed.
In this dialog you can enable or disable the following:
Installing and uninstalling programs on a computer can, in certain cases, cause COM DLL files to get unregistered. As COM Interfaces such as IAccessible depend on correct COM DLL registrations, issues can appear in case the correct registration is missing.
This can happen i.e. after installing and uninstalling Adobe Reader, Math Player and other programs.
The missing registration can cause issues in browsers, desktop apps, task bar and other interfaces.
Specifically, following issues can be solved by running this tool:
This item, once activated, reloads app modules and global plugins without restarting NVDA, which can be useful for developers.
This section contains information about the speech synthesizers supported by NVDA. For an even more extensive list of free and commercial synthesizers that you can purchase and download for use with NVDA, please see the extra voices page.
The eSpeak NG synthesizer is built directly into NVDA and does not require any other special drivers or components to be installed. On Windows 7, 8 and 8.1, NVDA uses eSpeak NG by default (Windows OneCore is used in Windows 10 by default). As this synthesizer is built into NVDA, this is a great choice for when running NVDA off a USB thumb drive on other systems.
Each voice that comes with eSpeak NG speaks a different language. There are over 43 different languages supported by eSpeak NG.
There are also many variants which can be chosen to alter the sound of the voice.
SAPI 4 is an older Microsoft standard for software speech synthesizers. NVDA still supports this for users who already have SAPI 4 synthesizers installed. However, Microsoft no longer support this and needed components are no longer available from Microsoft.
When using this synthesizer with NVDA, the available voices (accessed from the Speech category of the NVDA Settings dialog or by the Synth Settings Ring) will contain all the voices from all the installed SAPI 4 engines found on your system.
SAPI 5 is a Microsoft standard for software speech synthesizers. Many speech synthesizers that comply with this standard may be purchased or downloaded for free from various companies and websites, though your system will probably already come with at least one SAPI 5 voice preinstalled. When using this synthesizer with NVDA, the available voices (accessed from the Speech category of the NVDA Settings dialog or by the Synth Settings Ring) will contain all the voices from all the installed SAPI 5 engines found on your system.
The Microsoft Speech Platform provides voices for many languages which are normally used in the development of server-based speech applications. These voices can also be used with NVDA.
To use these voices, you will need to install two components:
Windows 10 includes new voices known as "OneCore" or "mobile" voices. Voices are provided for many languages, and they are more responsive than the Microsoft voices available using Microsoft Speech API version 5. On Windows 10, NVDA uses Windows OneCore voices by default (eSpeak NG is used in other releases).
Please see this Microsoft article for a list of available voices and instructions to install them: https://support.microsoft.com/en-us/help/22797/windows-10-narrator-tts-voices
This section contains information about the Braille displays supported by NVDA.
NVDA has the ability to detect many braille displays in the background automatically, either via USB or bluetooth. This behaviour is achieved by selecting the Automatic option as the preferred braille display from NVDA's Braille Settings dialog. This option is selected by default.
The following displays support this automatic detection functionality.
All Focus and PAC Mate displays from Freedom Scientific are supported when connected via USB or bluetooth. You will need the Freedom Scientific braille display drivers installed on your system. If you do not have them already, you can obtain them from https://support.freedomscientific.com/Downloads/Focus/FocusBlueBrailleDisplayDriver. Although this page only mentions the Focus Blue display, the drivers support all Freedom Scientific Focus and Pacmate displays.
By default, NVDA can automatically detect and connect to these displays either via USB or bluetooth. However, when configuring the display, you can explicitly select "USB" or "Bluetooth" ports to restrict the connection type to be used. This might be useful if you want to connect the focus display to NVDA using bluetooth, but still be able to charge it using USB power from your computer. NVDA's automatic braille display detection will also recognize the display on USB or Bluetooth.
Following are the key assignments for this display with NVDA. Please see the display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display back | topRouting1 (first cell on display) |
| Scroll braille display forward | topRouting20/40/80 (last cell on display) |
| Scroll braille display back | leftAdvanceBar |
| Scroll braille display forward | rightAdvanceBar |
| Toggle braille tethered to | leftGDFButton+rightGDFButton |
| Toggle left wiz wheel action | leftWizWheelPress |
| Move back using left wiz wheel action | leftWizWheelUp |
| Move forward using left wiz wheel action | leftWizWheelDown |
| Toggle right wiz wheel action | rightWizWheelPress |
| Move back using right wiz wheel action | rightWizWheelUp |
| Move forward using right wiz wheel action | rightWizWheelDown |
| Route to braille cell | routing |
| shift+tab key | brailleSpaceBar+dot1+dot2 |
| tab key | brailleSpaceBar+dot4+dot5 |
| upArrow key | brailleSpaceBar+dot1 |
| downArrow key | brailleSpaceBar+dot4 |
| control+leftArrow key | brailleSpaceBar+dot2 |
| control+rightArrow key | brailleSpaceBar+dot5 |
| leftArrow | brailleSpaceBar+dot3 |
| rightArrow key | brailleSpaceBar+dot6 |
| home key | brailleSpaceBar+dot1+dot3 |
| end key | brailleSpaceBar+dot4+dot6 |
| control+home key | brailleSpaceBar+dot1+dot2+dot3 |
| control+end key | brailleSpaceBar+dot4+dot5+dot6 |
| alt key | brailleSpaceBar+dot1+dot3+dot4 |
| alt+tab key | brailleSpaceBar+dot2+dot3+dot4+dot5 |
| alt+shift+tab key | brailleSpaceBar+dot1+dot2+dot5+dot6 |
| windows+tab key | brailleSpaceBar+dot2+dot3+dot4 |
| escape key | brailleSpaceBar+dot1+dot5 |
| windows key | brailleSpaceBar+dot2+dot4+dot5+dot6 |
| space key | brailleSpaceBar |
| windows+d key (minimize all applications) | brailleSpaceBar+dot1+dot2+dot3+dot4+dot5+dot6 |
| Report Current Line | brailleSpaceBar+dot1+dot4 |
| NVDA menu | brailleSpaceBar+dot1+dot3+dot4+dot5 |
For newer Focus models that contain rocker bar keys (focus 40, focus 80 and focus blue):
| Name | Key |
|---|---|
| Move braille display to previous line | leftRockerBarUp, rightRockerBarUp |
| Move braille display to next line | leftRockerBarDown, rightRockerBarDown |
For Focus 80 only:
| Name | Key |
|---|---|
| Scroll braille display back | leftBumperBarUp, rightBumperBarUp |
| Scroll braille display forward | leftBumperBarDown, rightBumperBarDown |
Both the ALVA BC640 and BC680 displays from Optelec are supported when connected via USB or bluetooth. Alternatively, you can connect an older Optelec display, such as a Braille Voyager, using a protocol converter supplied by Optelec. You do not need any specific drivers to be installed to use these displays. Just plug in the display and configure NVDA to use it.
Note: NVDA might be unable to use an ALVA BC6 display over Bluetooth when it is paired using the ALVA Bluetooth utility. When you have paired your device using this utility and NVDA is unable to detect your device, we recommend you to pair your ALVA display the regular way using the Windows Bluetooth settings.
Note: while some of these displays do have a braille keyboard, they handle translation from braille to text themselves by default. This means that NVDA's braille input system is not in use in the default situation (i.e. the input braille table setting has no effect). For ALVA displays with recent firmware, it is possible to disable this HID keyboard simulation using an input gesture.
Following are key assignments for this display with NVDA. Please see the display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display back | t1, etouch1 |
| Move braille display to previous line | t2 |
| Move to current focus | t3 |
| Move braille display to next line | t4 |
| Scroll braille display forward | t5, etouch3 |
| Route to braille cell | routing |
| Report text formatting under braille cell | secondary routing |
| Toggle HID keyboard simulation | t1+spEnter |
| Move to top line in review | t1+t2 |
| Move to bottom line in review | t4+t5 |
| Toggle braille tethered to | t1+t3 |
| Report title | etouch2 |
| Report status bar | etouch4 |
| shift+tab key | sp1 |
| alt key | sp2, alt |
| escape key | sp3 |
| tab key | sp4 |
| upArrow key | spUp |
| downArrow key | spDown |
| leftArrow key | spLeft |
| rightArrow key | spRight |
| enter key | spEnter, enter |
| Report date/time | sp2+sp3 |
| NVDA Menu | sp1+sp3 |
| windows+d key (minimize all applications) | sp1+sp4 |
| windows+b key (focus system tray) | sp3+sp4 |
| windows key | sp1+sp2, windows |
| alt+tab key | sp2+sp4 |
| control+home key | t3+spUp |
| control+end key | t3+spDown |
| home key | t3+spLeft |
| end key | t3+spRight |
| control key | control |
NVDA supports most displays from Handy Tech when connected via USB, serial port or bluetooth. For older USB displays, you will need to install the USB drivers from Handy Tech on your system.
The following displays are not supported out of the box, but can be used via Handy Tech's universal driver and NVDA add-on:
Following are the key assignments for Handy Tech displays with NVDA. Please see the display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display back | left, up, b3 |
| Scroll braille display forward | right, down, b6 |
| Move braille display to previous line | b4 |
| Move braille display to next line | b5 |
| Route to braille cell | routing |
| shift+tab key | esc, left triple action key up+down |
| alt key | b2+b4+b5 |
| escape key | b4+b6 |
| tab key | enter, right triple action key up+down |
| enter key | esc+enter, left+right triple action key up+down, joystickAction |
| upArrow key | joystickUp |
| downArrow key | joystickDown |
| leftArrow key | joystickLeft |
| rightArrow key | joystickRight |
| NVDA Menu | b2+b4+b5+b6 |
| Toggle braille tethered to | b2 |
| Toggle the braille cursor | b1 |
| Toggle focus context presentation | b7 |
| Toggle braille input | space+b1+b3+b4 (space+capital B) |
The Lilli braille display available from MDV is supported. You do not need any specific drivers to be installed to use this display. Just plug in the display and configure NVDA to use it.
This display does not support NVDA's automatic background braille display detection functionality.
Following are the key assignments for this display with NVDA. Please see the display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display backward | LF |
| Scroll braille display forward | RG |
| Move braille display to previous line | UP |
| Move braille display to next line | DN |
| Route to braille cell | route |
| shift+tab key | SLF |
| tab key | SRG |
| alt+tab key | SDN |
| alt+shift+tab key | SUP |
Several Baum, HumanWare, APH and Orbit displays are supported when connected via USB, bluetooth or serial. These include:
Some other displays manufactured by Baum may also work, though this has not been tested.
If connecting via USB to displays which do not use HID, you must first install the USB drivers provided by the manufacturer. The VarioUltra and Pronto! use HID. The Refreshabraille and Orbit Reader 20 can use HID if configured appropriately.
The USB serial mode of the Orbit Reader 20 is currently only supported in Windows 10. USB HID should generally be used instead.
Following are the key assignments for these displays with NVDA. Please see your display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display back | d2 |
| Scroll braille display forward | d5 |
| Move braille display to previous line | d1 |
| Move braille display to next line | d3 |
| Route to braille cell | routing |
For displays which have a joystick:
| Name | Key |
|---|---|
| upArrow key | up |
| downArrow key | down |
| leftArrow key | left |
| rightArrow key | right |
| enter key | select |
The hedo ProfiLine USB from hedo Reha-Technik is supported. You must first install the USB drivers provided by the manufacturer.
This display does not yet support NVDA's automatic background braille display detection functionality.
Following are the key assignments for this display with NVDA. Please see the display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display back | K1 |
| Scroll braille display forward | K3 |
| Move braille display to previous line | B2 |
| Move braille display to next line | B5 |
| Route to braille cell | routing |
| Toggle braille tethered to | K2 |
| Say all | B6 |
The hedo MobilLine USB from hedo Reha-Technik is supported. You must first install the USB drivers provided by the manufacturer.
This display does not yet support NVDA's automatic background braille display detection functionality.
Following are the key assignments for this display with NVDA. Please see the display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display back | K1 |
| Scroll braille display forward | K3 |
| Move braille display to previous line | B2 |
| Move braille display to next line | B5 |
| Route to braille cell | routing |
| Toggle braille tethered to | K2 |
| Say all | B6 |
The Brailliant BI and B series of displays from HumanWare, including the BI 14, BI 32, BI 40 and B 80, are supported when connected via USB or bluetooth. If connecting via USB with the protocol set to HumanWare, you must first install the USB drivers provided by the manufacturer. USB drivers are not required if the protocol is set to OpenBraille.
The following extra devices are also supported (and do not require any special drivers to be installed):
Following are the key assignments for the Brailliant BI/B and BrailleNote touch displays with NVDA. Please see the display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display back | left |
| Scroll braille display forward | right |
| Move braille display to previous line | up |
| Move braille display to next line | down |
| Route to braille cell | routing |
| Toggle braille tethered to | up+down |
| upArrow key | space+dot1 |
| downArrow key | space+dot4 |
| leftArrow key | space+dot3 |
| rightArrow key | space+dot6 |
| shift+tab key | space+dot1+dot3 |
| tab key | space+dot4+dot6 |
| alt key | space+dot1+dot3+dot4 (space+m) |
| escape key | space+dot1+dot5 (space+e) |
| enter key | dot8 |
| windows key | space+dot3+dot4 |
| alt+tab key | space+dot2+dot3+dot4+dot5 (space+t) |
| NVDA Menu | space+dot1+dot3+dot4+dot5 (space+n) |
| windows+d key (minimize all applications) | space+dot1+dot4+dot5 (space+d) |
| Say all | space+dot1+dot2+dot3+dot4+dot5+dot6 |
| Name | Key |
|---|---|
| NVDA Menu | c1+c3+c4+c5 (command n) |
| windows+d key (minimize all applications) | c1+c4+c5 (command d) |
| Say all | c1+c2+c3+c4+c5+c6 |
| Name | Key |
|---|---|
| up arrow key | joystick up |
| down arrow key | joystick down |
| left arrow key | joystick left |
| right arrow key | joystick right |
| enter key | joystick action |
NVDA supports Braille Sense, Braille EDGE, Smart Beetle and Sync Braille displays from Hims when connected via USB or bluetooth. If connecting via USB, you will need to install the USB drivers from HIMS on your system. You can download these from here: http://www.himsintl.com/upload/HIMS_USB_Driver_v25.zip
Following are the key assignments for these displays with NVDA. Please see the display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Route to braille cell | routing |
| Scroll braille display back | leftSideScrollUp, rightSideScrollUp, leftSideScroll |
| Scroll braille display forward | leftSideScrollDown, rightSideScrollDown, rightSideScroll |
| Move braille display to previous line | leftSideScrollUp+rightSideScrollUp |
| Move braille display to next line | leftSideScrollDown+rightSideScrollDown |
| Move to previous line in review | rightSideUpArrow |
| Move to next line in review | rightSideDownArrow |
| Move to previous character in review | rightSideLeftArrow |
| Move to next character in review | rightSideRightArrow |
| Move to current focus | leftSideScrollUp+leftSideScrollDown, rightSideScrollUp+rightSideScrollDown, leftSideScroll+rightSideScroll |
| control key | smartbeetle:f1, brailleedge:f3 |
| windows key | f7, smartbeetle:f2 |
| alt key | dot1+dot3+dot4+space, f2, smartbeetle:f3, brailleedge:f4 |
| shift key | f5 |
| insert key | dot2+dot4+space, f6 |
| applications key | dot1+dot2+dot3+dot4+space, f8 |
| Caps Lock key | dot1+dot3+dot6+space |
| tab key | dot4+dot5+space, f3, brailleedge:f2 |
| shift+alt+tab key | f2+f3+f1 |
| alt+tab key | f2+f3 |
| shift+tab key | dot1+dot2+space |
| end key | dot4+dot6+space |
| control+end key | dot4+dot5+dot6+space |
| home key | dot1+dot3+space, smartbeetle:f4 |
| control+home key | dot1+dot2+dot3+space |
| alt+f4 key | dot1+dot3+dot5+dot6+space |
| leftArrow key | dot3+space, leftSideLeftArrow |
| control+shift+leftArrow key | dot2+dot8+space+f1 |
| control+leftArrow key | dot2+space |
| shift+alt+leftArrow key | dot2+dot7+f1 |
| alt+leftArrow key | dot2+dot7 |
| rightArrow key | dot6+space, leftSideRightArrow |
| control+shift+rightArrow key | dot5+dot8+space+f1 |
| control+rightArrow key | dot5+space |
| shift+alt+rightArrow key | dot5+dot7+f1 |
| alt+rightArrow key | dot5+dot7 |
| pageUp key | dot1+dot2+dot6+space |
| control+pageUp key | dot1+dot2+dot6+dot8+space |
| upArrow key | dot1+space, leftSideUpArrow |
| control+shift+upArrow key | dot2+dot3+dot8+space+f1 |
| control+upArrow key | dot2+dot3+space |
| shift+alt+upArrow key | dot2+dot3+dot7+f1 |
| alt+upArrow key | dot2+dot3+dot7 |
| shift+upArrow key | leftSideScrollDown+space |
| pageDown key | dot3+dot4+dot5+space |
| control+pageDown key | dot3+dot4+dot5+dot8+space |
| downArrow key | dot4+space, leftSideDownArrow |
| control+shift+downArrow key | dot5+dot6+dot8+space+f1 |
| control+downArrow key | dot5+dot6+space |
| shift+alt+downArrow key | dot5+dot6+dot7+f1 |
| alt+downArrow key | dot5+dot6+dot7 |
| shift+downArrow key | space+rightSideScrollDown |
| escape key | dot1+dot5+space, f4, brailleedge:f1 |
| delete key | dot1+dot3+dot5+space, dot1+dot4+dot5+space |
| f1 key | dot1+dot2+dot5+space |
| f3 key | dot1+dot2+dot4+dot8 |
| f4 key | dot7+f3 |
| windows+b key | dot1+dot2+f1 |
| windows+d key | dot1+dot4+dot5+f1 |
| control+insert key | smartbeetle:f1+rightSideScroll |
| alt+insert key | smartbeetle:f3+rightSideScroll |
The Seika Version 3, 4 and 5 (40 cells) and Seika80 (80 cells) braille displays from Nippon Telesoft are supported. You can find more information about the displays and the required drivers at https://en.seika-braille.com/down/index.html You must first install the USB drivers provided by the manufacturer.
These displays do not yet support NVDA's automatic background braille display detection functionality.
Following are the key assignments for this display with NVDA. Please see the display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display back | left |
| Scroll braille display forward | right |
| Move braille display to previous line | b3 |
| Move braille display to next line | b4 |
| Toggle braille tethered to | b5 |
| Say all | b6 |
| tab | b1 |
| shift+tab | b2 |
| alt+tab | b1+b2 |
| NVDA Menu | left+right |
| Route to braille cell | routing |
The following Braille displays are supported:
These displays do not support NVDA's automatic background braille display detection functionality.
If BrxCom is installed, NVDA will use BrxCom. BrxCom is a tool that allows keyboard input from the braille display to function independently from a screen reader. Keyboard input is possible with the Trio and BRAILLEX Live models.
Most devices have an Easy Access Bar (EAB) that allows intuitive and fast operation. The EAB can be moved in four directions where generally each direction has two switches. The C and Live series are the only exceptions to this rule.
The c-series and some other displays have two routing rows whereby the upper row is used to report formatting information. Holding one of the upper routing keys and pressing the EAB on c-series devices emulates the second switch state. The live series displays have one routing row only and the EAB has one step per direction. The second step may be emulated by pressing one of the routing keys and pressing the EAB in the corresponding direction. Pressing and holding the up, down, right and left keys (or EAB) causes the corresponding action to be repeated.
Generally, the following keys are available on these braille displays:
| Name | Key |
|---|---|
| l1 | Left front key |
| l2 | Left rear key |
| r1 | Right front key |
| r2 | Right rear key |
| up | 1 Step up |
| up2 | 2 Steps up |
| left | 1 Step left |
| left2 | 2 Steps left |
| right | 1 Step right |
| right2 | 2 Steps right |
| dn | 1 Step down |
| dn2 | 2 Steps down |
Following are the Papenmeier command assignments for NVDA:
| Name | Key |
|---|---|
| Scroll braille display back | left |
| Scroll braille display forward | right |
| Move braille display to previous line | up |
| Move braille display to next line | dn |
| Route to braille cell | routing |
| Report current character in review | l1 |
| Activate current navigator object | l2 |
| Toggle braille tethered to | r2 |
| Report title | l1+up |
| Report Status Bar | l2+down |
| Move to containing object | up2 |
| Move to first contained object | dn2 |
| Move to previous object | left2 |
| Move to next object | right2 |
| Report text formatting under braille cell | upper routing row |
The Trio model has four additional keys which are in front of the braille keyboard. These are (ordered from left to right):
Currently, the right thumb key is not in use. The inner keys are both mapped to space.
| Name | Key |
|---|---|
| escape key | space with dot 7 |
| upArrow key | space with dot 2 |
| leftArrow key | space with dot 1 |
| rightArrow key | space with dot 4 |
| downArrow | space with dot 5 |
| control key | lt+dot2 |
| alt key | lt+dot3 |
| control+escape key | space with dot 1 2 3 4 5 6 |
| tab key | space with dot 3 7 |
The following Braille displays are supported:
Note that these displays can only be connected via a serial port. Due to this, these displays do not support NVDA's automatic background braille display detection functionality. You should select the port to which the display is connected after you have chosen this driver in the Select Braille Display dialog.
Some of these devices have an Easy Access Bar (EAB) that allows intuitive and fast operation. The EAB can be moved in four directions where generally each direction has two switches. Pressing and holding the up, down, right and left keys (or EAB) causes the corresponding action to be repeated. Older devices do not have an EAB; front keys are used instead.
Generally, the following keys are available on braille displays:
| Name | Key |
|---|---|
| l1 | Left front key |
| l2 | Left rear key |
| r1 | Right front key |
| r2 | Right rear key |
| up | 1 Step up |
| up2 | 2 Steps up |
| left | 1 Step left |
| left2 | 2 Steps left |
| right | 1 Step right |
| right2 | 2 Steps right |
| dn | 1 Step down |
| dn2 | 2 Steps down |
Following are the Papenmeier command assignments for NVDA:
Devices with EAB:
| Name | Key |
|---|---|
| Scroll braille display back | left |
| Scroll braille display forward | right |
| Move braille display to previous line | up |
| Move braille display to next line | dn |
| Route to braille cell | routing |
| Report current character in review | l1 |
| Activate current navigator object | l2 |
| Report title | l1up |
| Report Status Bar | l2down |
| Move to containing object | up2 |
| Move to first contained object | dn2 |
| Move to next object | right2 |
| Move to previous object | left2 |
| Report text formatting under braille cell | upper routing strip |
BRAILLEX Tiny:
| Name | Key |
|---|---|
| Report current character in review | l1 |
| Activate current navigator object | l2 |
| Scroll braille display back | left |
| Scroll braille display forward | right |
| Move braille display to previous line | up |
| Move braille display to next line | dn |
| Toggle braille tethered to | r2 |
| Move to containing object | r1+up |
| Move to first contained object | r1+dn |
| Move to previous object | r1+left |
| Move to next object | r1+right |
| Report text formatting under braille cell | upper routing strip |
| Report title | l1+up |
| Report status bar | l2+down |
BRAILLEX 2D Screen:
| Name | Key |
|---|---|
| Report current character in review | l1 |
| Activate current navigator object | l2 |
| Toggle braille tethered to | r2 |
| Report text formatting under braille cell | upper routing strip |
| Move braille display to previous line | up |
| Scroll braille display back | left |
| Scroll braille display forward | right |
| Move braille display to next line | dn |
| Move to next object | left2 |
| Move to containing object | up2 |
| Move to first contained object | dn2 |
| Move to previous object | right2 |
NVDA supports the BrailleNote notetakers from Humanware when acting as a display terminal for a screen reader. The following models are supported:
For BrailleNote Touch, please refer to the Brailliant BI Series / BrailleNote Touch section.
Except for BrailleNote PK, both braille (BT) and QWERTY (QT) keyboards are supported. For BrailleNote QT, PC keyboard emulation isn't supported. You can also enter braille dots using the QT keyboard. Please check the braille terminal section of the BrailleNote manual guide for details.
If your device supports more than one type of connection, when connecting your BrailleNote to NVDA, you must set the braille terminal port in braille terminal options. Please check the BrailleNote manual for details. In NVDA, you may also need to set the port in the Select Braille Display dialog. If you are connecting via USB or bluetooth, you can set the port to "Automatic", "USB" or "Bluetooth", depending on the available choices. If connecting using a legacy serial port (or a USB to serial converter) or if none of the previous options appear, you must explicitly choose the communication port to be used from the list of hardware ports.
Before connecting your BrailleNote Apex using its USB client interface, you must install the drivers provided by HumanWare.
On the BrailleNote Apex BT, you can use the scroll wheel located between dots 1 and 4 for various NVDA commands. The wheel consists of four directional dots, a centre click button, and a wheel that spins clockwise or counterclockwise.
Following are the BrailleNote command assignments for NVDA. Please check your BrailleNote's documentation to find where these keys are located.
| Name | Key |
|---|---|
| Scroll braille display back | back |
| Scroll braille display forward | advance |
| Move braille display to previous line | previous |
| Move braille display to next line | next |
| Route to braille cell | routing |
| NVDA menu | space+dot1+dot3+dot4+dot5 (space+n) |
| Toggle braille tethered to | previous+next |
| Up arrow key | space+dot1 |
| Down arrow key | space+dot4 |
| Left Arrow key | space+dot3 |
| Right arrow key | space+dot6 |
| Page up key | space+dot1+dot3 |
| Page down key | space+dot4+dot6 |
| Home key | space+dot1+dot2 |
| End key | space+dot4+dot5 |
| Control+home keys | space+dot1+dot2+dot3 |
| Control+end keys | space+dot4+dot5+dot6 |
| Space key | space |
| Enter | space+dot8 |
| Backspace | space+dot7 |
| Tab key | space+dot2+dot3+dot4+dot5 (space+t) |
| Shift+tab keys | space+dot1+dot2+dot5+dot6 |
| Windows key | space+dot2+dot4+dot5+dot6 (space+w) |
| Alt key | space+dot1+dot3+dot4 (space+m) |
| Toggle input help | space+dot2+dot3+dot6 (space+lower h) |
Following are commands assigned to BrailleNote QT when it is not in braille input mode.
| Name | Key |
|---|---|
| NVDA menu | read+n |
| Up arrow key | upArrow |
| Down arrow key | downArrow |
| Left Arrow key | leftArrow| |
| Right arrow key | rightArrow |
| Page up key | function+upArrow |
| Page down key | function+downArrow |
| Home key | function+leftArrow |
| End key | function+rightArrow |
| Control+home keys | read+t |
| Control+end keys | read+b |
| Enter key | enter |
| Backspace key | backspace |
| Tab key | tab |
| Shift+tab keys | shift+tab |
| Windows key | read+w |
| Alt key | read+m |
| Toggle input help | read+1 |
Following are commands assigned to the scroll wheel:
| Name | Key |
|---|---|
| Up arrow key | upArrow |
| Down arrow key | downArrow |
| Left Arrow key | leftArrow |
| Right arrow key | rightArrow |
| Enter key | centre button |
| Tab key | scroll wheel clockwise |
| Shift+tab keys | scroll wheel counterclockwise |
NVDA supports EcoBraille displays from ONCE. The following models are supported:
In NVDA, you can set the serial port to which the display is connected in the Select Braille Display dialog. These displays do not support NVDA's automatic background braille display detection functionality.
Following are the key assignments for EcoBraille displays. Please see the EcoBraille documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display back | T2 |
| Scroll braille display forward | T4 |
| Move braille display to previous line | T1 |
| Move braille display to next line | T5 |
| Route to braille cell | Routing |
| Activate current navigator object | T3 |
| Switch to next review mode | F1 |
| Move to containing object | F2 |
| Switch to previous review mode | F3 |
| Move to previous object | F4 |
| Report current object | F5 |
| Move to next object | F6 |
| Move to focus object | F7 |
| Move to first contained object | F8 |
| Move System focus or caret to current review position | F9 |
| Report review cursor location | F0 |
| Toggle braille tethered to | A |
The SuperBraille device, mostly available in Taiwan, can be connected to by either USB or serial. As the SuperBraille does not have any physical typing keys or scrolling buttons, all input must be performed via a standard computer keyboard. Due to this, and to maintain compatibility with other screen readers in Taiwan, two key bindings for scrolling the braille display have been provided:
| Name | Key |
|---|---|
| Scroll braille display back | numpadMinus |
| Scroll braille display forward | numpadPlus |
The Esys, Esytime and Iris displays from Eurobraille are supported by NVDA. Esys and Esytime-Evo devices are supported when connected via USB or bluetooth. Older Esytime devices only support USB. Iris displays can only be connected via a serial port. Therefore, for these displays, you should select the port to which the display is connected after you have chosen this driver in the Braille Settings dialog.
Iris and Esys displays have a braille keyboard with 10 keys. Of the two keys placed like a space bar, the left key is corresponding to the backspace key and the right key to the space key.
Following are the key assignments for these displays with NVDA. Please see the display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display back | switch1-6left, l1 |
| Scroll braille display forward | switch1-6Right, l8 |
| Move to current focus | switch1-6Left+switch1-6Right, l1+l8 |
| Route to braille cell | routing |
| Report text formatting under braille cell | doubleRouting |
| Move to previous line in review | joystick1Up |
| Move to next line in review | joystick1Down |
| Move to previous character in review | joystick1Left |
| Move to next character in review | joystick1Right |
| Switch to previous review mode | joystick1Left+joystick1Up |
| Switch to next review mode | joystick1Right+joystick1Down |
| Erase the last entered braille cell or character | backSpace |
| Translate any braille input and press the enter key | backSpace+space |
| insert key | dot3+dot5+space, l7 |
| delete key | dot3+dot6+space |
| home key | dot1+dot2+dot3+space, joystick2Left+joystick2Up |
| end key | dot4+dot5+dot6+space, joystick2Right+joystick2Down |
| leftArrow key | dot2+space, joystick2Left, leftArrow |
| rightArrow key | dot5+space, joystick2Right, rightArrow |
| upArrow key | dot1+space, joystick2Up, upArrow |
| downArrow key | dot6+space, joystick2Down, downArrow |
| enter key | joystick2centre |
| pageUp key | dot1+dot3+space |
| pageDown key | dot4+dot6+space |
| numpad1 key | dot1+dot6+backspace |
| numpad2 key | dot1+dot2+dot6+backspace |
| numpad3 key | dot1+dot4+dot6+backspace |
| numpad4 key | dot1+dot4+dot5+dot6+backspace |
| numpad5 key | dot1+dot5+dot6+backspace |
| numpad6 key | dot1+dot2+dot4+dot6+backspace |
| numpad7 key | dot1+dot2+dot4+dot5+dot6+backspace |
| numpad8 key | dot1+dot2+dot5+dot6+backspace |
| numpad9 key | dot2+dot4+dot6+backspace |
| numpadInsert key | dot3+dot4+dot5+dot6+backspace |
| numpadDecimal key | dot2+backspace |
| numpadDivide key | dot3+dot4+backspace |
| numpadMultiply key | dot3+dot5+backspace |
| numpadMinus key | dot3+dot6+backspace |
| numpadPlus key | dot2+dot3+dot5+backspace |
| numpadEnter key | dot3+dot4+dot5+backspace |
| escape key | dot1+dot2+dot4+dot5+space, l2 |
| tab key | dot2+dot5+dot6+space, l3 |
| shift+tab key | dot2+dot3+dot5+space |
| printScreen key | dot1+dot3+dot4+dot6+space |
| pause key | dot1+dot4+space |
| applications key | dot5+dot6+backspace |
| f1 key | dot1+backspace |
| f2 key | dot1+dot2+backspace |
| f3 key | dot1+dot4+backspace |
| f4 key | dot1+dot4+dot5+backspace |
| f5 key | dot1+dot5+backspace |
| f6 key | dot1+dot2+dot4+backspace |
| f7 key | dot1+dot2+dot4+dot5+backspace |
| f8 key | dot1+dot2+dot5+backspace |
| f9 key | dot2+dot4+backspace |
| f10 key | dot2+dot4+dot5+backspace |
| f11 key | dot1+dot3+backspace |
| f12 key | dot1+dot2+dot3+backspace |
| windows key | dot1+dot2+dot3+dot4+backspace |
| Caps Lock key | dot7+backspace, dot8+backspace |
| num lock key | dot3+backspace, dot6+backspace |
| shift key | dot7+space, l4 |
| Toggle shift key | dot1+dot7+space, dot4+dot7+space |
| control key | dot7+dot8+space, l5 |
| Toggle control key | dot1+dot7+dot8+space, dot4+dot7+dot8+space |
| alt key | dot8+space, l6 |
| Toggle alt key | dot1+dot8+space, dot4+dot8+space |
| ToggleHID keyboard input simulation | esytime):l1+joystick1Down, esytime):l8+joystick1Down |
NVDA supports displays from Nattiq Technologies when connected via USB. Windows 10 detects the Braille Displays once connected, you may need to install USB drivers if using older versions of Windows (below Win10). You can get them from the manufacturer's website.
Following are the key assignments for Nattiq Technologies displays with NVDA. Please see the display's documentation for descriptions of where these keys can be found.
| Name | Key |
|---|---|
| Scroll braille display back | up |
| Scroll braille display forward | down |
| Move braille display to previous line | left |
| Move braille display to next line | right |
| Route to braille cell | routing |
BRLTTY is a separate program which can be used to support many more braille displays. In order to use this, you need to install BRLTTY for Windows. You should download and install the latest installer package, which will be named, for example, brltty-win-4.2-2.exe. When configuring the display and port to use, be sure to pay close attention to the instructions, especially if you are using a USB display and already have the manufacturer's drivers installed.
For displays which have a braille keyboard, BRLTTY currently handles braille input itself. Therefore, NVDA's braille input table setting is not relevant.
BRLTTY is not involved in NVDA's automatic background braille display detection functionality.
Following are the BRLTTY command assignments for NVDA. Please see the BRLTTY key binding lists for information about how BRLTTY commands are mapped to controls on braille displays.
| Name | BRLTTY command |
|---|---|
| Scroll braille display back | fwinlt (go left one window) |
| Scroll braille display forward | fwinrt (go right one window) |
| Move braille display to previous line | lnup (go up one line) |
| Move braille display to next line | lndn (go down one line) |
| Route to braille cell | route (bring cursor to character) |
NVDA can accept one or more additional options when it starts which alter its behaviour. You can pass as many options as you need. These options can be passed when starting from a shortcut (in the shortcut properties), from the Run dialog (Start Menu -> Run or Windows+r) or from a Windows command console. Options should be separated from the name of NVDA's executable file and from other options by spaces. For example, a useful option is --disable-addons, which tells NVDA to suspend all running add-ons. This allows you to determine whether a problem is caused by an add-on and to recover from serious problems caused by add-ons.
As an example, you can exit the currently running copy of NVDA by entering the following in the Run dialog:
nvda -q
Some of the command line options have a short and a long version, while some of them have only a long version. For those which have a short version, you can combine them like this:
| nvda -mc CONFIGPATH | This will start NVDA with startup sounds and message disabled, and the specified configuration |
| nvda -mc CONFIGPATH --disable-addons | Same as above, but with add-ons disabled |
Some of the command line options accept additional parameters; e.g. how detailed the logging should be or the path to the user configuration directory. Those parameters should be placed after the option, separated from the option by a space when using the short version or an equals sign (=) when using the long version; e.g.:
| nvda -l 10 | Tells NVDA to start with log level set to debug |
| nvda --log-file=c:\nvda.log | Tells NVDA to write its log to c:\nvda.log |
| nvda --log-level=20 -f c:\nvda.log | Tells NVDA to start with log level set to info and to write its log to c:\nvda.log |
Following are the command line options for NVDA:
| Short | Long | Description |
|---|---|---|
| -h | --help | show command line help and exit |
| -q | --quit | Quit already running copy of NVDA |
| -k | --check-running | Report whether NVDA is running via the exit code; 0 if running, 1 if not running |
| -f LOGFILENAME | --log-file=LOGFILENAME | The file where log messages should be written to |
| -l LOGLEVEL | --log-level=LOGLEVEL | The lowest level of message logged (debug 10, input/output 12, debug warning 15, info 20, warning 30, error 40, critical 50, disabled 100), default is warning |
| -c CONFIGPATH | --config-path=CONFIGPATH | The path where all settings for NVDA are stored |
| -m | --minimal | No sounds, no interface, no start message, etc. |
| -s | --secure | Secure mode: disables Python console, profile features such as creation, deletion, renaming profiles etc., update check, some checkboxes in the welcome dialog and in general settings category (e.g. Use NVDA during sign-in, save configuration after exit etc.), as well as logviewer and logging features (used often in secure screens). Note also that this command will disable the possibility to save settings in system config and the gesture map will not be saved on the disk. |
| None | --disable-addons | Add-ons will have no effect |
| None | --debug-logging | Enable debug level logging just for this run. This setting will override any other log level ( --loglevel, -l) argument given, including no logging option. |
| None | --no-logging | Disable logging altogether while using NVDA. This setting can be overridden if a log level ( --loglevel, -l) is specified from command line or if debug logging is turned on. |
| None | --no-sr-flag | Don't change the global system screen reader flag |
| None | --install | Installs NVDA (starting the newly installed copy) |
| None | --install-silent | Silently installs NVDA (does not start the newly installed copy) |
| None | --enable-start-on-logon=True|False | When installing, enable NVDA's Use NVDA during Windows sign-in |
| None | --create-portable | Creates a portable copy of NVDA (starting the newly created copy). Requires --portable-path to be specified |
| None | --create-portable-silent | Creates a portable copy of NVDA (does not start the newly installed copy). Requires --portable-path to be specified |
| None | --portable-path=PORTABLEPATH | The path where a portable copy will be created |
NVDA allows some values to be set in the system registry which alter the system wide behaviour of NVDA. These values are stored in the registry under one of the following keys:
The following values can be set under this registry key:
| Name | Type | Possible values | Description |
|---|---|---|---|
| configInLocalAppData | DWORD | 0 (default) to disable, 1 to enable | If enabled, stores the NVDA user configuration in the local application data instead of the roaming application data |
| serviceDebug | DWORD | 0 (default) to disable, 1 to enable | If enabled, disables secure mode on windows secure desktops, allowing the use of the Python console and Log viewer. Due to several major security implications, the use of this option is strongly discouraged |
If you require further information or assistance regarding NVDA, please visit the NVDA web site at https://www.nvaccess.org/. Here, you can find additional documentation, as well as technical support and community resources. This site also provides information and resources concerning NVDA development.